Sky RC D100 Neo AC/DC Charger Dual Balance Charger/Discharger for LiPo, LiFe, LiHV and NiMh Batteries - SK-100199

Easy To Use Press the "Batt.Type" button to the user settings or select battery type or exit the program, press the "Start" button twice to the parameters setting, press the "Dec." or "Inc." button to switchover, press and hold the "Start" button to charge battery

SK-100149-03

Versatile Multi-function Charger This 80W Lipo Battery Charger is designed to accommodate a wide range of battery types, including LiPo, Li-ion, NiMH, Li-Fe, and NiCd batteries. It is a must-have for RC hobbyists, model aircraft enthusiasts, and anyone else who relies on these batteries for their activities.

LED Indicator When you connect the charger to the 7.4V lithium battery, Coll1 Coll2 starts to light up red, and the 7.4V lithium battery is being charged. When you connect the 11.1V lithium battery, Coll1 Coll2 Coll3 starts to light red, and the 11.1V lithium battery is charging. When the lithium battery is fully charged, the LED indicator will be in a steady green state.

Efficient Charging LiPo battery USB charging cable plug. Specially designed for charging 7.4V LiPo batteries, input DC 5V, output current 800mA. 2-3 hours to full charge (depending on battery capacity).

Fast charge AC input voltage 100-240V; Max. Charging current 3 * 800mA, charging an 11.1V 1200mAh Li-Po battery only takes 1.5 hours.

More power 800mAh Lipo battery rechargeable pack is ready to deliver the power for you anytime,anywhere.RC battery pack delivers a discharge rate to push your rc drone run time to the peak of its abilities

Increase your RC controller to new performance levels

Contents 1 item

Balance, storage and fast charge

Automatically adapt to USB input power, quickly and stably recharge the battery.

RC battery charger is special designed for Syma X5C drone battery. And it can guarantee to meet the specification of original equipment.Deformable model

Indicator Light The lipo battery USB charger cable has an indicator, When charging, the green light is flashing and the red light is on. When the battery is fully charged, the green light stays on and the red light turns off. If the red light is always on, it means that the charger is not charging your battery.

Compatibility The lithium battery USB charging cable compatible with the following models Syma X5, X5C, X5SC, X5SW, X4, H107, H107L, H107C, H107D, V977, V930, U816, etc. Suitable for 18650, 14500 batteries. This USB charger cable for RC 3.7V can meet a variety of needs.

Product Details - Type Drone USB Charger Cable; Cable Length 55cm; Input 5V 0.5-2A; Output 3.7V 500mA (Max 4.23V 500mA); Connector Type USB to SM.

This LiPo battery USB charger is specifically designed for 7.2V batteries and comes equipped with an Tamiya PLUG. Before use, please ensure that the voltage (7.2V) is compatible. The input is DC 5V 2A, output is 7.2V 250mAh, connector is USB to Tamiya Plug

Features USB Connectors to use with any USB Outlet charger adapter. Has a IC Protectionunit, for protection against over charge and short-circuit. Green and Red LED Indicators show if it is still charging or fully charged. Output has a XH-3P plug, 3 Pin Port Connector.Put Together with Care, to charge Your LiPo Batteries fast and safe.

Ultra Safe Our high technology enables intelligent IC protection. Built-in overload, over-voltage, overcharge IC protection circuit. Please make sure that the voltage(7.4V) match before use.

This LiPo battery USB charger is specifically designed for 7.4V LiPo batteries and comes equipped with an SM-3 PIN PLUG. Before use, please ensure that the voltage (7.4V) is compatible. The input is DC 5V 2A, output is 7.4V 1000mAh, connector is USB to SM-3 PIN Plug

Indicator Light The lipo battery USB charger cable has an indicator, When charging, the green light turns off and the red light is on. When the battery is fully charged, the green light stays on and the red light turns off.