BARTSHARP Airbrush Compressor AC04 2 Electric Cooling Fan 2 Single Pistons 2 Power Settings Airbrushing Scale Models Hobbies Crafts Cake Decorating Cosmetics Auto-Motorcycle Graphics

Product description

• Trusted BARTSHARP Airbrush Compressor Jet Black Design with a powerful 1 4HP Motor and twin oil-less pistons. The compressor operates at around 49db and produces 35 40 litres of air per minute.
• The AC04 Airbrush compressor is robust, weighing approximately 7kg. Measurements are 34cm (L) x 32cm (H) x 14cm (W). (Height measure to top of compressor head and width measured at compressor feet).
• Two Electric Cooling Fans provide a constant stream of air over the electric motor which improves efficiency whilst also addressing the common problem of compressor cut out, due to overheating, on models without a cooling system.
• Two Power Switch Positions 1 Auto Start Stop (up to 57PSI) the compressor will automatically start to provide compressed air to the tank as soon as the unit is turned on. Once the air in the tank is up to pressure (this value will depend on the working pressure set at the Air Pressure Regulator) the compressor will automatically stop pumping and only start again when the air pressure, within the tank, falls below a certain value).
• 3.5 Litre Air Tank the tank sits on four large rubber feet to help reduce sound transfer. The tank is also fitted with an auto safety pressure release valve. Fitted to the front of the tank is an Air Pressure Regulator Valve which removes moisture and traps airborne contaminants. The Pressure Regulator also has a clear dial displaying both BAR and PSI measurements. The Pressure Regulator is fully adjustable and used to set the required working air pressure at the airbrush. The Air Pressure Regulator has a 1 8BSP male outlet. 1 8BSP denotes the type and pitch of thread British Standard Pipe which is the most common type used in air fittings. 1 8 is approximately 9.35mm in diameter.