Naruto Dress-Fan Square Pencil Case 2.2, Multicolour, 22 x 9 cm

Due to the installation of the cheapest and short-life plain bearings in this fan, this 12 V airflow fan is only 3 months.

We offer a free 92mm metal fan grill to protect 12v cooling fan, cable and fingers, always make sure that buyer use the fan safely, XH2.54-2Pin connetor is easy to install, 92mm fan 2pin can be laid flat or stand upright, so 12v computer fan is easy and convenient, it is a good choice for 92mm fan replacement, or DIY Ventilation Cooling .

Detail optimization The PC fan adopts UL CLASSA insulation grade industrial-grade strength PBT+PC material, with a cable up to 55CM, and supports PWM series control of the case fan.

Perfect match The slim fan can not only be used as a case fan, but also suitable for downward coolers and Low Profile CPU Air Cooler to cooling down CPU jointly aim at maximized heat dissipation performance

Vibration-absorbing and low noise The four corners of the fan are equipped with four vibrations absorbing pads, which pwm can reduce the vibration and friction caused by the rotation of the fan, perfectly reduce the noise and allow low-noise performance.

WIDE RPM RANGE Thanks to the 4-pin connector, the speed can be controlled via PWM. Below 5 % PWM the fan stands still, above 5 % it is infinitely variable between 200-3000 rpm

Specifications Size 3.62x3.62x1.0 in 92x92x25mm; Voltage DC 12V ; Speed 1800 RPM ; Airflow 44 CFM ; Noise 27 dBA ; Connetor 3 Pin connector ;

WIDE RPM RANGE Thanks to the 4-pin connector, the speed can be controlled via PWM. Below 5 % PWM the fan stands still, above 5 % it is infinitely variable between 450-4300 rpm

Technical data Dimension 92x92x25mm 3.62x3.62x1.0in ; Up to 1800RPM, Airflow is 39.8CFM, Noise is 24.2dBA, The Life Expectancy is About 35000hrs, Using Hydraulic Bearing

Greatly increase the efficiency (50% increase) quiet and efficient 12 V PC fan

Connector XH2.54-2Pin

made in China, each fan is tested before shipping and is working fine

Precision balanced low air impedance fan blades.

Dimension 92*92*25 mm (3.6*3.6*1 inches)

WIDE RPM RANGE Thanks to the 4-pin connector, the speed can be controlled via PWM. Below 5 % PWM the fan stands still, above 5 % it is infinitely variable between 200-3000 rpm

GAMING LIGHTING Includes a 90mm fan at the back of the case with Fixed RGB lighting, providing a constant flow of colour and bringing your set up to life

Dimensions of Silent Fan Size 92*92*25mm, Speed 2200RPM 10%, Noise 23.85dBA Connector 4pin pwm, wind pressure 1.98mm H2O,Air Flow 32.77CFM (MAX), Higher air flow for improved cooling performance.

Ideal 12V DC brushless fan replacement for noisy or broken DC fan in 3D printers, heatsink, humidifier, frequency converter, Computer PC case, CPU, DVRs, NAS, switches, routers, other network and storage devices, etc., it also good for pet ventilation.

Dimension 92*92*25 mm (3.6*3.6*1 inches)

One compartment with zippered closure