blodfune Wood Stove Fan Heat Powered Fireplace Fan, 6 Blades Wood Burning Stove Fan Eco Fan Non Electric, Heat Activated Thermal Fan 25db for Gas Pellet Stove Magnetic Thermometer Accessories (1)

Show on Amazon

Offer

Product description

  • Upgrade design 6 blades The upgrade design of 6 blades makes the whole fan have more wind power, improve the air circulation efficiency of the whole room by more than 55%, the working temperature is 50-350 degrees Celsius, the wind speed is 1400rpm, install this fan in front of your fireplace, can quickly raise the temperature of the room for you, save the amount of firewood need to burn.
  • Unrivalled performance Heat powered fan is equipped with new generation pure copper generator, balanced output, wood burning stove fan is up to 120-220cfm when Motor Converts heat at the base of the fireplace into electricity, Warm air is pushed into the room in horizontally rather than simply rises up to the ceiling or being trapped around the stove. This heat fan for wood stove improves the stove efficiency and maximizes heat distribution throughout the room.
  • Temperature Range & Easy To Install The measuring temperature of these flue pipe temperature meter ranges from 100 to 400 degrees Celsius, providing accurate measuring of temperature, easy to read with large dial. A magnet on the back allows these stove thermometer to be placed on the metal surface of stove top or side. Equipped with a metal handy hook, the fireplace thermometer can help attach the thermometer onto the stove and quickly reposition the meter to find the best place for temperature readings.
  • Quiet design The operating noise of the furnace blade is less than 25db, so there is no need to worry about excessive noise during operation, providing a quiet and warm environment for you and your family. And this fan does not need to be assembled, placed in front of the fireplace to start it, so that you get double the warmth in winter.
  • Thermal power operation According to the principle of thermodynamics, there is a small motor with two semiconductors inside the thermal electric fan. The bottom of the fireplace fan heats from inside the furnace, while the top of the furnace fan cools, and the temperature difference between the two drives the motor, which in turn rotates the blades of the furnace fan that thermally operates. So no external power is needed, saving you money on your electricity bill.
  • Place In Right Position in order for the fireplace heat fan to get the cool air required to complete the process it needs to be positioned correctly, but not blocking the back of it with a wall or the flue of the stove itself. To the side of the flu and allowing for around 4 inch at the back of it will allow heat powered stove fan for wood to get plenty of cool air to work its magic!
  • Overheating Protection Pellet stove fan is built in Bi-metallic strip thermally controlled actuator for optimum performance, cocoon fan for wood stove raises the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the thermoelectric module, ensuring the long life of the heat fan for fireplace.

You might also be interested in these non electrical fans.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.