Shower or Bath Threshold Water Barrier Seal Strip | 80cm, 90cm, 140cm, 200cm or 250cm Long | Clear, White or Black | Used in Wetrooms or with Doors/Screens | Rigid Material | SEAL055 (25mm Clear)

Easy to Install - Our shower tray sealing strip is 3m long, 15mm high x 25mm wide. You can cut it freely according to the actual gap size and choose to install it horizontally or vertically. First clean and dry the counter (or floor) surface, measure and cut the shower stopper to your length, peel off the red adhesive strip and stick to the smooth surface. (In winter, you can use a hair dryer to heat it to achieve better viscosity).THE EDGE LINE MUST BE SEALEDWITH WATERPROOF GLUE

Size H 3cm 1.18in; W 1.6cm 0.63in. This shower threshold can be placed horizontally or vertically according to personal needs.

PRODUCT SIZE You will receive a waterproof strip with 20g glue, the size is about 1m*30mm*12mm. The height of the shower seal is 12mm, which can block the spread of water flow in a large area, and is convenient for users to use flexibly in various environments.

How To Install First clean and dry the counter(or the floor)surface, measure and cut the shower water stopper to your length, peel off the red adhesive back strip, stick to the smooth surface(In winter, you can use a hair dryer for heating to achieve better viscosity).For a better seal, it is must to use silicone sealant to fill the edges of the water stopper barrier and dry for 24 hours until the sealants is solidified(the package do not contain silicone sealant).

How To Instal First clean and dry the surface,measure and cut,peel an stick to complete the installation. Tips For Long time Use, It Is Must To Use Silicone Sealant(Glue) To Fill The Edges Of The Water Barrier And Dry For 24 Hours Until The Sealants Is Solidified(The Package Do Not Contain Silicone Sealant)

Wet and Dry Separation It is high enough to withstand the trouble of submerged floor drainand isolate the shower room from the outside world. After installation, water leakage can be avoided and the bathroom can be kept clean. It can be applied to shower pan, kitchen sink, toilet.

A threshold seal can be found in a number of different places such as the edge of a bath or on the floor of a wetroom. They are simply designed to create a physical barrier that the water cannot pass to ensure that the water stays within the confines of your shower bath.

Easy to Install - Our shower tray sealing strip is 3m long, 15mm high x 25mm wide. You can cut it freely according to the actual gap size and choose to install it horizontally or vertically. First clean and dry the counter (or floor) surface, measure and cut the shower stopper to your length, peel off the red adhesive strip and stick to the smooth surface. (In winter, you can use a hair dryer to heat it to achieve better viscosity).

How To Install First clean and dry the surface, measure and cut the wet room floor water barrier to your length, peel off the red adhesive back strip, stick to the Smooth Surface.NOTICE For Long Use, It Is Must To Use Silicone Sealant(Glue) To Fill The Edges Of The Water Barrier And Dry For 24 Hours Until The Sealants Is Solidified(The Package Do Not Contain Silicone Sealant)!!!

SLIGHT ARCH UNDER PROFILE TO ALLOW ROOM FOR SILICONE

HIGH QUALITY MATERIAL Made of durable and odourless silicone material, wear-resistant, corrosion-resistant, heat-resistant and odourless, can be easily cleaned by simply wiping with a damp cloth.

How To Installation First clean and dry the surface, measure and cut the wet room floor water barrier to your length, peel off the red adhesive back strip, stick to the Smooth Surface.NOTION For Long Use, It Is Must To Use Silicone Sealant(Glue) To Fill The Edges Of The Water Barrier And Dry For 24 Hours Until The Sealants Is Solidified(The Package Do Not Contain Silicone Sealant)!!!

Silicone Material and Two Adhesive Backing The silicone sealing strip with two self-adhesive tapes on the back,which has better sealing performance and firmer adhesion.The water dam is made of food grade organic silicon, which is corrosion resistant, high temperature resistant, wear resistant.

Safety Material The shower tray sealing strip comes with two tapes on the back of the water dam, better sealing performance and stronger adhesion. The shower tray seal is made of TPE material, which is corrosion-resistant, heat-resistant and wear-resistant

High-quality Shower Water Barrier The shower splash guard is made of high-quality soft rubber material (TPE), which is flexible and elastic, rounded edges without burrs, waterproof and mould-resistant, corrosion-resistant and resistant to high and low temperatures without deformation.

High-Quality Silicone Material This wet room floor barrier is made from premium silicone, providing a flexible, premium, and waterproof seal for your shower, bathtub, sink, and kitchen surfaces. It s designed to effectively separate wet and dry zones while withstanding high temperatures

EASY INSTALLATION Clean and dry the surface, cut the shower seal strip to the desired length, peel off the adhesive back strip, and stick it onto a smooth surface. For long-term use, silicone sealant (not included) should be applied to the edges to ensure a tight seal. Allow 24 hours for the sealant to fully set before use.

Color Red

Size Our wet room floor barrier has a total length of 98 inches 2.5m, width of 2.5cm 0.98in, height of 1.5cm 0.59in, you can choose to install it horizontally or vertically according to the size of the gap, and you can cut the length according to your needs!

WIDE RANGE OF USES Splash guard strip is ideal for under the shower curtain, beside the shower pan, bathroom threshold, pool mesa, washing machine, basin, closestool, bathtub edge, kitchens, countertop edges, shower trays, balcony floors, as thresholds between enclosed walls and floors etc.