Garage Gate Long Throw Bolt Lock SECURITY SHED 70 50 MM 5 Key (70 MM)

Show on Amazon

Offer

i

Product description

  • Step Two Work out the position the lock should be mounted and mark affix the template. The lock body should be no less 5mm from the edges of the gate and obviously the throw of the lock needs to reach across to secure the gate. Also Check on the other side of the gate to ensure the hole is in a suitable position.
  • Step Three Using the drill bit supplied make sure the hole is drilled level and straight for the best performance of the lock. Drill through until the central point of the drill bit protrudes out on the back and then finish the hole off from the back side to avoid splintering the timber.

You might also be interested in these concise home 50mm double long throw gate locks.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.