PAUTIX COB LED Strip Warm White 2700K, 10M 4800LEDs 24V CRI90+ Dimmable Bright COB Light Strip Kit with 13 Keys RF Remote and 24V Power Supply COB LED Lights for Bedroom Kitchen Home DIY Projects

Show on Amazon

Colour: 2700k

Offer

Price trend

Product description

  • Ultra Brightness - Compared with SMD 2835 1 chip on board or 5050 3 chips on board, COB (Chip On Board) LED light has multiple chips on the same circuit board (PCB). There are total 4800 chips on the 10M(480LEDs M) COB LED Strip Lights, bringing the emitting units unprecedentedly close together and producing a super even lighting output, more uniform lighting, no worries about dark spots!
  • Enduring and Widely Used - Different from single-sided PCB, the true double-layer PCB is more resistant to compression and are not easily damaged or deformed. With strong double-sided adhesive tape, PAUTIX COB LED strip lights can be attached and installed reliably. 10m per roll with 20AWG 20cm extension cable and DC female plug, very suitable for decoration in kitchen, cabinet, bedroom, stairs, mirror, hallway, DIY backlight, table lamp, toy lamp and other places needed.
  • Updated RF Dimmer Set - The 13 keys RF remote control allows to 360 control the strip light within 15m. 4 timer delay setting functions(60s 10m 30m 60m) satisfy you to set the OFF time of the light strip. Pre-set 3 level dimming function (25%, 50%, 100%) meets your brightness needs in different scenarios. Th memory function can keep the last setting when you turn on your light without having to set it repeatedly. 3 Keys controller with peel-and -stick adhesive back can be easily to fixed.
  • Packaging Scope & Warranty - The package contains 1 X 10m PAUTIX 24V 2700K Warm White COB LED strip light; 1 X 13 Keys RF remote controller; 1 X DC24V 2A 48W power supply. PAUTIX provides 5-year worry-free warranty, please contact us in time if there is any problem with the product.
  • Warm Tips - The exension wires at the end of the strip that is convenient for you to connect the DC connector included in the package so that you can power at both ends when you add longer strips in the kit can be cut if you don't need to connect more strips. The 48W power supply in the kit is just enough for the strip light in the kit use. You must replace it with a higher output 24V power supply if the total length of the strip light exceeds 10M.

You might also be interested in these led lights for acoustic wall panels.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.