Tiger GTC4-06 6 Metre 20 Foot - 6.35mm 1/4 Inch Jack to Jack Lead Guitar Instrument Cable with Interchangeable Coloured Loops & Stagg SMC6 6 metre standard microphone cable

Product description

• Product 1 Quality heavy duty 1 4 - 6.3mm soldered jack mono plugs
• Product 2 Note Make sure the amplifier interface s input is designed to handle the level of current to match the input device (Mic Line Inst). Never step or stand on a cable.
• Product 1 High quality shielded low noise instrument cable available in 3 metre, 6 metre 10 metre lengths
• Product 1 Designed for electric guitars, acoustic guitars, bass, synths, keyboards, or any instrument with a quarter inch signal jack output
• Product 2 ROHS-conform
• Product 2 For best results, use this cable only to connect a microphone with XLR output to a preamp with XLR input. If you are using phantom power, do not turn on phantom power until the connection is established. Only turn up the gain trim after the phantom power has been switched on again. If Phantom Power is not being used, set Grain Trim only after the connection is established