Cooling Fan for 2, Cooling Fan for VR, Gas Circulation Fan 3 Speeds Heat Dissipation Prevent Fogging Soft Pad Cooling Fan for 2 VR

Dual fan system the cooling fan adopts a new dual fan system, and when the air conduction and ventilation structure of the mask is extended, the wind is redirected and the cool air wraps around the entire mask to prevent fogging during intense play. At the same time, the noise-dampened fan ensures that you don't have to worry about noise interference.

COOLING FAN SYSTEM, PREVENT FOGGING VR fan sucks the heat outside to accelerate gas circulation so get your face cooler and less sweat, and stop the lens and glasses from fogging, provides you with better gaming immersion and need not take off the headset frequently like before.

VBESTLIFE

Powerful Fan Controlled fan speeds from 300 RPM up to 2,000 RPM, pushing up to 58 CFM of air with 1.94mm-H2O of static pressure.

PREVENT FOGGING Stay cool and sweat- with this VR cooling fan that accelerates gas circulation, ensuring better gaming immersion while preventing lens and glasses fogging.

EASY PLUG & PLAY This hard drive enclosure 4X 2.5 plugs in without tools when installing. the magnetic structure was used to complete the installation in just 3 seconds. The fan on the back of the product ensures good heat dissipation. In addition, the blue indicator light provides an overview of the operating status

INCREASED PRODUCTIVITY The mobile rack backplane for 3.5in SAS II SATA III turns three 5.25in bays into a hot-swappable interface for up to four 3.5 SATA or SAS hard drives (HDD)

support 4 x 3.5 hard drives and 2.5 hard drive or ssd (solid-state drive)

Supports 4 Drives

BUY WITH CONFIDENCE If you encounter any problems during use, please contact us in advance. We will give you a satisfactory answer as soon as possible. Register your product at Sabrent.com, contact our friendly customer service [email protected]

BUILT-IN DEFOGGING FAN There are four air inlets designed to enhance air inflow, and the flow of wind blowing can be defogged for your vr lens.The width is the same as the official facial interface.

Up to 32TB storage capacity It is Compatible with 3.5" and 2.5" SATA HDD; 2.5" SATA SSD. Maximum Single Volume Size 16TB.

50,000+ insertion rating

CONVENIENT SETUP Use this dual 2.5in HDD SDD mounting bracket to install two 2.5 inch SSDs (solid-state drives) or HDDs (hard drives) into a 3.5 inch drive bay on your desktop PC

Dual fan system the cooling fan adopts a new dual fan system, and when the air conduction and ventilation structure of the mask is extended, the wind is redirected and the cool air wraps around the entire mask to prevent fogging during intense play. At the same time, the noise-dampened fan ensures that you don't have to worry about noise interference.

Magnetic Mounting Pulsator Adjustment The fan has two-way magnetic suction easy to install and remove.External pulsator mask space height adjustment is more convenient

Added Cooling Fan The unique vent design of this mask holder with cooling fan can keep your face cool while gaming, no more sweat build-up, fogging or overheating problems, ensure breathable and no light leakage.

Cooling Defogger Fan Two wind speed mode adjustments will not make your eyes dry when defogging. The Face Pad is specially designed for Quest 3 and the ventilation structure & Booster pad is good news for eyeglasses.It always keeps the lenses clear and cool during wearing. The fan is only 60g and will not put a burden on the Headset, Enhance your VR gaming experience

ADJUSTABLE FIT Tailor the mask to your individual needs with adjustable height knobs, perfect for those who wear glasses and desire a secure fit.

ENHANCED COMFORT Reduce facial pressure by increasing the effective force bearing area of the cover by 95%, significantly alleviating discomfort during long gaming .