WWZMDiB MAX98357 I2S Audio Amplifier Module, 3.2W Class D, Unfiltered, Supports ESP32, Raspberry Pi, Part Number: MAX98357, Channels: 1

With short-circuit protection, over temperature protection; also with standby & mute features on this amp board.

High Power Subwoofer Stereo Amplifier with a large power DC stereo amp, providing 3-5W output power.

5.5V Supply 50dB PSRR at 1KHz

Short circuit protection Output short circuit protection.

Class D The Digital power amplifier board is a high performance Class D power amplifier with Class D efficiency for true high end sound quality. Maintain ultra low distortion for perfect sound quality.

4. Signal to noise ratio 90dB

Perfect circuit & HiFi clear sound concise layout and reasonable wiring, no pop and audible noise even at high power output. The sound is very clear and smooth, the bass with shocking effects just like in the cinema, providing auditory feast.

Low THD+N(0.1%) without filter; small static current; low power consumption; small heating generator.

Output short circuit .

35 different clocks and 128 digital audio formats can be automatically configured with a single power supply.

and AUX Functionality Equipped with 5.0 technology for enhanced connectivity and longer transmission distance of up to 10m in open spaces. Additionally, you can input sound signals via the 3.5mm headphone port if your playback device does not have capability.

Amplifier Module 2 Channels Stereo Audio Power Amplifier Module. Output Power 2x10W 2x15W. Amplifier Chip PAM8610.

For excellent sound quality, the Amplifier Board uses a digital input with high noise immunity and high jitter tolerance. It also provides electromagnetic interference suppression and enables the connection of loudspeakers.

This item uses a high noise immunity digital input with high jitter tolerance

With a filter inductor, the sound is round and clear.

After the power amplifier board is powered, the DC voltage between the two pads of the speaker is 0V, and the DC voltage between the speaker pad and GND is half of the power supply voltage.Hands should not touch the pins of the components on the board, human interference signals interfere with the timing of the digital power amplifier, resulting in damage to the chip. A strong high voltage with static electricity on the human body will break down and damage the chip.

can provide 3W (left channel) +3 W (right channel) output power in the 4 load and 5V power supply conditions

We provide you with the best customer experience, if you are satisfied please contact Astyer.

Bluetooth amplifier Board does not add a simple two-way microphone input module, but also has built-in DSP reverberation and howl suppression functions.

Filterless design, with ferrite bead+capacitors on output