cablecc USB 2.0 9pin 10pin Header 1 to 4 Female Splitter Extension Cable HUB with IDE 5V Power Connector Adapter Port Multilier

Wide Compatibility FIDECO SATA and IDE adapter can support 2.5 and 3.5 inches SATA HDD; 2.5 inches SATA SSD; 2.5 and 3.5 inches IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW.

-Power Supply DC 12V 2A Compatible systems Windows XP or above, MacOS 9 or above, Linux

Turns SATA IDE drive into a convenient external drive, could be used as a bridge to connect SATA 3.5" hard disk,2.5" & 3.5" IDE hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface (Not Suitable for 2.5" SATA HDD).

Note Please download the OTB software to use the One Click Backup feature, and check the network manual for details if necessary.

Great Compatibility FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer or offline clone - IDE Source+SATA2 Target; SATA1 Source+SATA2 Target. Please note that for data transfer or offline clone, IDE Source and SATA1 Source cannot be connected simultaneously.

Compatible for More - The IDE to SATA Adapter can read & write 3 hard drives simultaneously; work for 2.5-inch, 3.5-inch SATA HDD SSD, IDE HDD and other 5.25-inch CDs DVD Drives.

Compatible System FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!

Support Plug and Play Hot Plug Plug and play, support hot plug, easy to install. Auto sleep function, leave it for 30 minutes to enter auto sleep mode. The on off switch is also designed to protect your hard drive. It also has an LED light so you can always know the working status

SUPPORTS; Hard Disk, CD-ROM, DVD-ROM, CD-RW, Combo Device and DVD-RW to computer

USB2.0 interface, 480 Mbps high speed data transfer rate. 52X CD-ROM Supported. Supports Hard Disk, CD-ROM, DVD-ROM, CD-RW, Combo Device and DVD-RW to computer with USB 2.0 interface One IDE 40 Pin Port for internal CDRW, DVDRW, CD Rom, DVD Rom, 2.5" 3.5" Hard disk, COMBO device and etc

SuperSpeed Transmission The transfer speed of the IDE hard drive reader can be up to 5Gbps via a USB3.0 port; backward compatible with USB2.0 and USB1.1.

Wide Compatibilty The IDE SATA to USB C Hard Drive Adapter supports any 2.5'' 3.5'' SATA HDD SSD and IDE HDD, 5.25'' Optimal Drive to work with Windows,Linux,macOS System.

Compatible with any 2.5 inch, 3.5 inch, 5.25 inch IDE or SATA drive

HIGH TRANSFER SPEEDS For fast access to external storage, this hard drive transfer converter supports transfer rates up to 480Mbps using USB 2.0.High-Speed Data Transfer, Low Power Consumption

FAST TRANSFER SPEED This USB to SATA cable can support USB 3.0 data transfer speeds of 5Gbps. High-speed transmission, see 2.0 interface compatibility, however, when you connect to a computer that also supports UASP, you can transfer up to 70% faster than traditional USB 3.0. The USB 3.0 to SATA adapter uses two high-speed interfaces with a theoretical speed of 6 Gbit s and supports UASP protocol. support for SATA transmission rate SATA II (3 Gbps), SATA I (1.5 Gbps).

The working temperature is low,

Supports 2.5" and 3.5" HDD devices

Item Type Power Adapter Cable

Advantage This USB SATA adapter allows simultaneous access to all 3 HDD drives or file transfer between 3 drives. Support 2.5in 3.5in SATA hard disk and SSD; 2.5in 3.5in IDE hard disk; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW

Universal compatibility 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 " 3.5" IDE SATA I II III hard disk and SSD, Maximum support 20TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note Please do not replace the hard drive when the product is working.)