3S 4S 12V 5.5A Capacitor Active Equalizer Whole Group Balancer Lifepo4 LFP Lipo Li-ion Lto Lithium Active Battery Energy Transfer Equalization + Protective Case

Show on Amazon

Offer

Product description

  • NOTE Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips This balancer board is backward compatible by default. eg. If it is used for 3S, the last line B4+ is empty.
  • The Quiescent Current is about 12mA, and the battery capacity is recommended to be used between 30-300AH Per Balancer. High-capacity batteries can be connected in parallel with multiple equalizers; With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
  • RUN Pad you can add a switch to control the balancer. Default short connect, let balancer working. if disconnect, it will not working. One LED indicator It will always be on during normal operation, but it will not turn on when there is a problem or malfunction. Equipped with VH3.96 terminal by default, come with 1.31ft 18awg wire.

You might also be interested in these 12v batteries balancer.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.