HS01 Sealing Corner Seal Shower Bathroom Kitchen Waterproof Joint Sealing HS01 Pack of 10

Show on Amazon

Offer

Product description

  • Surface preparation the surface must be stable, flat, clean, dust and grease free as well as without old paint layers or fine elements that can affect the product adhesion. In this case, prime with appropriate reason. Impurities and non-load-bearing layers must be removed and reworked with the appropriate material,
  • Area of application the corner is intended for sealing all inner corners between wall and floor as well as for sealing systems in outer corners under tiles. For indoor and outdoor use, use in rooms that are temporarily or constantly stressed by water and moisture. The sealing corner is suitable for swimming pools, saunas, fountains as well as for balcony and patio seals. The product is intended for bathrooms, toilets, showers, kitchens, washrooms and basements.
  • It is compatible with all liquid polymer and polymer element sealants. The product is not intended for component joints.
  • The preparation of the substrate takes place with a thin layer of semi-construction sealant, then the corner can be inserted. After installation, press the corner from above with a soft tool in the direction of the ground. The connection between the corner and the sealing tape should be carried out as precisely as possible.
  • Please note the overlap of the corner with the sealing tape of 40 mm. The connection between the corner and the sealing tape is done with the semi-assembly sealant.
  • Note neither the middle part of the corner and the sealing tape (approx. 20 mm) nor the same area below may be coated with the sealant when inserted. The connection with semi-construction sealant on both sides, at least two layers, whereby the middle part of the corner and the sealing tape (at least 20 mm) remain unputty.

You might also be interested in these showers seal corner joint.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.