650nm red line Laser Module Industrial Laser Module Adjustable Focus line Length 19.7″ DC Plug Diameter 10mm (point-2packs)
Show on Amazon
Show on Amazon
Offer
£ 23.30
£ 6.19 | 1-2 Days
go to shop
Price trend
Product description
- Light source red light, can adjust the focal length,Laser module diameter 10mm
- The light emitted is used as an indicator light to point to the target, and the emitted light is used as a dazzling light to set off the atmosphere.
- It can be used in equipment, floor tile cutting, swinging instrument, stage lighting, indoor and outdoor decoration, medical care instrument, infrared lighting, optical fiber communication, etc.
You might also be interested in these 532nm green laser line module generator projectors.
532nm Green Laser Locator Module Line Beam Fit for Woodcut Positioning Light Marker Laser Level Tool
Dimensions 18 mm X 75mm
free shipping
Check price
Quarton Laser Module VLM-520-28 LPT Green Laser Line Generator (ECONOMICAL LINE Laser)
Direct Green Laser Diode for large temperature operation range. Wave length 520nm. Continuous wave laser output power Laser power output LPT - Class I - less than 0.39mW. Voltage 7 10 VDC operation. Dimensions D9 x 26 mm (D0.354 x 1.024 inches). Emitting angle 60
free shipping
Check price
ATOMSTACK A40 Pro Laser Engraving Machine, 48W Output Laser Engraver One-Button Switch to Exchange 24W/48W Modes, Laser Cutter with Tank Chain Gathering Design, Non-Clogging Laser Module
One-button Switch to Exchange 20W 40W Modes ATOMSTACK A40 Pro features a new laser design for one-button switching between 20W and 40W output power. Different modes are activated for engraving and cutting. With the highest 40W optical power in the industry, the ATOMSTACK A40 Pro can cut through 18mm basswood, pine and paulownia, 9mm MDF board, and can cut through 0.1mm stainless steel sheet.
free shipping
Check price
Upgraded 5W Laser Module, LASER TREE 23mm Fixed Focus Balance Engraving and Cutting Head, Laser Engraver Module 5W Optical Power with Metal Wind Gathering Hood, Suitable for Laser Engraver Machine
Applicable Materials LASER TREE Laser Cutting and Engraving Plywood, black acrylic, MDF, wood, paper, leather, bamboo, plastic, rubber, alumina, stainless steel, etc. (Unable to engrave blue purple white transparent material, aluminum without oxide layer).
free shipping
Check price
450nm 4W Laser Module,LASER TREE 4W Engraving Module,Adjustable Focal, Blue Laser Head for Engraving Machine DIY Engraving Wood Tools Paper Leather
Main performance LASER TREE 20W Laser Module Line width is narrower ordinary plywood, adjustable focus 35mm Line Width Cutting Through 1-2mm Plywood By One Pass.Output Power 0.5mW,Class 1.
free shipping
Check price
Youmile 4PCS Laser Sensor Module Non-Modulator Tube Laser Receiver Module for Arduino with 4PCS KY-008 650nm Laser Transmitter Module, Dupont Cable
Output High level when there is laser irradiation, low level when there is no laser irradiation.
Check price
Aufero Laser Module 5500mW (5W) Output Power for Laser Engraver Machine 24V Laser Engraving Head Class 4(Short Focus)
1.5500mW Laser module with short focus(long focus) Aufero laser module engraving area is 390*410mm.Motherboard 32-bit MCU Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm min.Laser class Class 4,Power output level 5500 mW
free shipping
Check price
DC Green Laser Module Industrial Laser Module, Adjustable Focal Length line Length 19.7 ″/50cm DC Plug Diameter 12mm Traverse(1pack)
Use scenarios Clothing freeze-frame positioning, carpentry positioning, wood cutting positioning,stone cutting positioning etc.
free shipping
Check price
Laser Module Kit 5W with Air Assist,LASER TREE 45mm Fixed Focus Balance Engraving and Cutting Laser Head,450nm Laser Engraver Module Head for Laser Engraver Machine,12V
Top Engraving and cutting Capability LASER TREE 5W Laser Module Kit Direct Engraving Mirror Stainless Steel, no need to Paint Black. Very Fast Engraving Speed,304 stainless steel, up to 800mm s at a Focal Length of 45mm, Excellent Cutting Ability Cutting 4mm Thick Plywood by One Pass with a Focal Length of 45mm at a Speed of 80-190mm min.Output Power 0.5mW,Class 1.
free shipping
Check price
Lights88 GLM12-360 360 Green Laser Line Module, 5mw, 520nm
Reflecting Cone Lens Laser Line Circle Laser Level Use
free shipping
Check price
Green line Laser Module Industrial Laser Module Adjustable Focus (point-2pack)
Light source green light
free shipping
Check price
650nm red line Laser Module Industrial Laser Module Adjustable Focus line Length 19.7″ DC Plug Diameter 10mm (point-2packs)
Light source red light, can adjust the focal length,Laser module diameter 10mm
Check price
Green line Laser Module Industrial Laser Module Adjustable Focus (line-2pack)
Light source green light
free shipping
Check price
Red line Laser Module, Industrial Laser Module, Adjustable Focus, line Length 39″USB Connector Diameter 12mm(line-1pack)
Light source red light
Check price