WITEN&NOCK Shower Seal 2 x 70 cm for 5-6 mm Black Glass Door, Straight Door Thicknesses Replacement, Water-Repellent Shower Cubicle

Show on Amazon

Model: AM-GUG-CB670x2-W

Offer

Product description

  • 2 x 70 cm in black. In this model, the glass thicknesses are 5 mm, 6 mm, 8 mm and 10 mm. The black water deflector has double draining profiles and is particularly tight. The rubber lip is approx. 12.5 mm and fits perfectly with the gap of a shower from 11 to 12 mm.
  • These shower door seals are universal for all manufacturers of glass showers of all kinds, especially for better sealing for frameless shower partitions such as swing doors, swing doors, folding doors etc. predestined. The sealing profile can be easily attached from the bottom after cleaning the glass. You do not need to stick it with silicone.
  • After removing your old seal and cleaning your shower door, the replacement seals can be attached horizontally to the lower glass edge as a water repellent profile or splash protection profile. Each sealing profile can be easily shortened to the desired length with a Puk saw, fretsaw or a cutter knife.
  • With the double rubber lips, the splashing water stays in the shower. The spatial wet and dry separation is reliably ensured and a risk of slipping is thus reduced. In addition, our shower door seals are mould resistant and hygienically easy to clean. It is worth replacing the shower cubicle seal or bath seal. Enhance your bathroom and shower with our seal not only functionally, but also visually.

You might also be interested in these showers door trim replacement.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.