RockyMars Underground Cable Wire Locator, NF-826, Detects Cables, Wires, Water & Gas Pipelines, Voltage Measurement (12V-400V), Circuit Tester

Suitable For DC 6 42 Volt Circuit Power This short open circuit tester will work on all kinds of circuits with voltages between 6 and 42 volt DC. (such as those found in automobiles,trucks,tractors,boats,RVs,etc...With its wide working voltage range).

This Automotive Short and Open Finder, car repair tool is designed to identify and trace wires or cables without damaging the insulation.

1. NF-826 Underground & In-Wall Wire Locator is a portable instrument,which consists of transmitter, receiver and accessories.Selecting new integrated devices and digital circuit technology, the electrical performance is stable and reliable. According to the change of the signal, the specific location and fault of the buried cable or pipeline can be detected.it will diagnose the fault location for you, no need to dig the entire cable path to find the fault location, no damage to walls or ground

Multi-function Detection The combination of Network Cable Tester and Optical Power Meter, very sturdy and compact for storing. A larger backlit LCD display, the results are more visible!

SAFETY FIRST When the detected voltage is higher, or the closer it is to the voltage source, it will beep at a higher frequency and the light will be red. Red means high voltage and live wires are detected, yellow means low voltage and neutral wires are detected.

Easy to use Transmitter and Receiver LEDs show open or short circuit conditions

Dual Range Electrical Tester The 2022 upgraded circuit tester s default mode is 48-1000V(Low Sensitivity), press the S to switch to 12-1000V(High Sensitivity), which can meet standard and low voltage (12-1000V AC 48-1000V AC) for more sensitive and flexible measurements. Also, it is easier to identify live and null wire when the wires are neighbouring.

Cable Tracing with 2 Scan Modes Digital mode analog mode, and sensitivity adjustable. You can change modes whenever you like, quickly and efficiently find the target cable in large number of cables and in a noisy environment.

DC Voltage Operates from 6 to 42 volts

Adjustable sensitivity The sensitivity of the voltage detector is adjusted to any value according to your requirements. Low sensitivity for more accuracy at distinguishing complex lines; High sensitivity for easier finding hidden lines and installing deeper wall outlets.

Does not damage the insulation layer the cable finder detects the passage of cables or wires without damaging the insulation. Check if the cable is continuous. Track cables or wires and diagnose breakpoints.

Non-contact AC Voltage Tester This test pen has NCV sensor, you can detect the presence of AC voltage by simply pressing the power switch and bring the probe of the test pen close to the power socket or live line.

AC VOLTAGE DETECTION The Labgear voltage detector pen is a quick and simple method for non-contact detection of the presence of AC voltages from 90v to 600v with improved balance sensitivity for more accurate detection

Where You Can Locate Locate-Determining Which Receptacles are on specific circuits, track-Pinpointing Drill Sites before drilling.

Can only be used for DC voltage, can not connect DC voltage greater than 42 volts under any environment. Cannot be used for AC voltage.

RECHARGEABLE The mini voltage tester comes with a rechargeable battery for long, continuous use. No more used batteries to protect the environment.

Dual Range Electrical Tester The 2022 upgraded circuit tester s default mode is 48-1000V(Low Sensitivity), press the S to switch to 12-1000V(High Sensitivity), which can meet standard and low voltage (12-1000V AC 48-1000V AC) for more sensitive and flexible measurements. Also, it is easier to identify live and null wire when the wires are neighbouring.

Easily trace wires from source to termination

Testers

Sensitivity Adjustment you can adjust the high or low sensitivity by the "S" button. The green backlight is low sensitivity, while the yellow is high.