Tilta EVF Extension Bracket Compatible with BMPCC 6K PRO Filmmaking Kit - Black TA-EEB-B

THREE PIVOT POINTS ADJUSTMENT The EVF monitor mount enables 360 adjustment via three pivot points to secure your monitor at the best viewing angle. The tightness of each pivot point can be adjusted via a knob wrench.

More Durable Tilt Axis The swivel and tilting monitor mount supports 180 tilt and 360 swivel adjustment. You can quickly adjust the strength of the tilt axis via the button. The damping rate after 10,000 tilt adjustments is less than 20%.

165 TILT RANGE SmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design fits for DJI RS 4 Pro RS 4 RS 3 Pro RS 3 RS 2 RSC 2, it is a perfect match with the stabilizer.

Quick Release Camera Monitor Mount The SmallRig HawkLock H21 Quick Release Monitor Holder 4487 is composed of a monitor mount with a NATO clamp and a NATO rail. Press the button to flare the pins, then slide the NATO rail into the groove. Release the button to securely lock the NATO rail into the monitor mount, making your shooting more efficient and time-saving

Purpose SMALLRIG Monitor Mount 2100 is designed to hold your monitor onto a camera cage, handle, or other rigs via NATO Clamp

For DJI RS 4 Mini RS 4 Pro RS 4 RS 3 Pro RS 3 RS 2 RSC 2 SmallRig 3025 NATO Clamp Accessory Mount is designed for DJI RS 4 Pro RS 4 RS 3 Pro RS 3 RS 2 RSC 2. In addition, the clamp compatible with original DJI RS 2 RS 3 RS 3 Pro smartphone mount

High Customization SmallRig Adjustable Camera Monitor Mount 4637 is compatible for DJI RS 2 RSC 2 RS3 RS 3 Pro RS 3 mini RS 4 RS 4 Pro RS 4 Mini stabilizers, specifically designed for expanding photography equipment on the stabilizer side. It can be used to connect monitor, motion camera, microphone, and other devices on both sides of the stabilizer

Dual Anti-Twist Design The camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V V+, and silicone pad to prevent the monitor from scratching and twisting

Compatibility SMALLRIG Mini NATO Side Handle 3813 is designed for use with camera cages. It attaches quickly to cages if the cage has a built-in Nato rail on the side. SmallRig 1409 and 2172 are recommended for cages without built-in NATO rail

The 15mm rod clamp locks with a single locking lever. It works as part of SMALLRIG Mini Follow Focus 3010.

RECOMMENDATION It works with items with NATO clamp, such as SMALLRIG NATO Clamp 1973, SMALLRIG Monitor Mount with NATO clamp 2100 and 2906, SMALLRIG Rotating Nato Handle HTN2362, for quick attachment and release.

The NATO handle is a sliding top handle for moving shoots. Compatibility with small single-lens reflex cameras and SWAT NATO rails Sony A7 A7r A7s A7II A7RII A7SII, A6000 A6300 A6500 camera cages, Panasonic G7, GH4 , GH5, G85, Fujifilm X-T2 camera cages, etc.

12 Threaded Holes Ten 1 4" threaded holes and two 3 8" threaded holes for arri could attach more accessories, such as monitor mount 2903B and magic arm 2066B.

360 swivel and 180 tilt - the camera monitor holder allows a lateral swivel 360 and tilt 180 with free stop in any position. It allows the photographer to better monitor according to the requirements in different shooting scenarios. (Note please adjust the tightness you need for the first use.)

Wide Compatibility for Action Camera - SmallRig Handlebar Mount 4191 is compatible with Action Cameras, eg. for GoPro 11 10 9 8 7, for Insta360 ONE R ONE X ONE X2 X3, for DJI Osmo Action 4 and other action cameras. The dynamic load is 0.5kg. In dynamic scenarios, please use it with a safety cord (not included) for device protection.

Related Accessories The SMALLRIG monitor mount 2174 is compatible with SMALLRIG A7 IV Half Cage 3639, GH6 Cage Kit 3441, A7 IV Cage Kit 3668, NATO Side Handle 3260, Top Handle 3765 and any cage or handle with 3 8 locating holes for more DIY options

HIGH QUALITY With durable and lightweight aluminium alloy,the clamp weights only 58 grams but can lock your accessories solid and firmly,.Dimensions 32 x 14 x 20mm,With HQ CNC technology , it has anodized finish and delicate machining

Lightweight and Easy to Carry SmallRig NATO clamp to quick release plate for Arca-Swiss is designed to enhance the vertical camera shooting experience. Weighing a mere 32g, this accessory ensures seamless portability and compatibility.

RECOMMENDATION It works with items with NATO clamp, such as SMALLRIG NATO Clamp 1973, SMALLRIG Monitor Mount with NATO clamp 2100 and 2906, SMALLRIG Rotating Nato Handle HTN2362, for quick attachment and release.

Compatibility The v mount battery plate fits most V-mount batteries and Blackmagic URSA mini, but not the PAGlink series V-mount batteries and Patona Premium Battery for BP-190WS.