Wet Room Shower Bathroom Waterproof Tanking Tape Waterproof Membrane 10M Roll . Apply With Powdered Tile Adhesive.

Show on Amazon

Offer

i

Price trend

Product description

  • INSTRUCTIONS This tape is not self adhesive. Apply using powdered S1 or S2 adhesive (available from tile shops). We use BAL or MAPEI adhesives. Apply adhesive using a fine notched trowel and press tape or corners into adhesive. Roll out firmly using a wallpaper seam edge roller. Remove surplus adhesive with a damp sponge. Can be tiled on immediately.
  • SPECIFICATIONS - Description; PP PE Shower Liner Material; polyethylene(PE) film; polypropylene(PP) nonwoven Roll size; 125mm x 10m Weight; 300g sqm Thickness; 0.5mm nominal Colour; Orange Breaking strength; 1084psi 100 day water immersion shear strength; 120psi Permeability ASTM E96; 0.75 perms
  • WATERPROOF - When fitting a shower or wet room, we always recommend taping the corners and floor junctions with tanking tape and corners. When applied using an S1 or S2 adhesive the tape will provide a waterproof barrier with flexibility of movement. Can be used indoors or out, and safe for use with underfloor heating.
  • SUITABILITY - Indoor or outdoor Use with underfloor heating Use with any substrate; plasterboard, wediboard, cement board Use with any S1 or S2 tile adhesive. Flexible and tear resistant 100% waterproof

You might also be interested in these showers tray tanking tape.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.