Drum Rim Microphone Clip, Mic Clamp Holder Durable Shockproof Metal for Drum Rim Microphone

Product description

• Sturdy Mic Holder The drum mic clips adopt compact constrution with hard plastic material and solid metal screws, shockproof, can resist drop impact. Drum rim microphone clip is made with excellent craftsmanship, which is beautiful and smooth
• Adjust Height & Direction Each drum microphone clamp is equipped with a screw attachment, and the position of the screw can be moved up and down, it can be properly adjusted in microphone height and direction. And it is simple and convenient to adjusted without disturbing the microphone stand
• Easy Installation This drum microphone shockproof clip can be installed on the edge of any drum, which is very convenient to install and has a good shock-proof effect. This drum clamp has a flexible design with 3 groove points, suitable for use in a variety of drums or other instrument microphones
• Fit for Various Drums The drum microphone clips can be installed on the edge of most of drums, which helps reduce vibrations and unwanted noise and to improve recording. Whether you're recording in a studio, performing at a bar or club, or playing on stage, the microphone drum clip set is the ideal accessory for music enthusiasts
• How to Use 1. Loosen the support knob, insert the lower fixing rod of the swing arm into the slot and tighten it; 2. Unscrew the microphone chuck at the front end of the swing arm, use a coin into the card slot to unscrew the above conversion screw, and install the knob on the front end of the swing arm. Connect the connection port of the stabilizer to the conversion screw and tighten it; 3. Pull the microphone cable, insert the microphone into the stabilizer, and then connect the cable