4M/157inch Shower Strip,Silicone Wet Room Floor Barrier,Bath Edging Sealing Strip,Bathroom Sink Bathtub Countertop Water Retaining Strip(2.5cm,White)

Offer

i

Price trend

Product description

  • How To Install First clean and dry the surface, measure and cut the shower water stopper to your length, peel off the red adhesive back strip, stick to the Smooth Surface.NOTICE For Long Use, It Is Must To Use Silicone Sealant(Glue) To Fill The Edges Of The Water Barrier And Dry For 24 Hours Until The Sealants Is Solidified(The Package Do Not Contain Silicone Sealant).
  • High Quality Silicone Material The water dam is made of food grade organic silicon, which is corrosion resistant, high temperature resistant, wear resistant. The bath edging strip is soft and does not hurt your feet.
  • Size The size of the silicone water barrier is 15mm H x 25mm W ,two installation methods are provided, you can choose to install it horizontally or vertically according to the size of the gap (as shown in the picture);4 meters in length ,you can cut to the length you need!
  • Attention 1,The silicone floor seal is only 15mm in height ,which cannot meet the requirements of barrier-free showers and large water holding areas. 2,The bath splash guard can only be fixed in a straight line, not bent.At the corners we recommend cutting to 45 degrees, splicing 90 degrees to paste.

You might also be interested in these bathroom sink glues.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.