29.4V 2A Electric bicycle Scooter ebike Battery charger for Xiaomi 25.2V 29.4V 42V 54.6V Li-ion Battery 24V 36V 48V 6S 7S 10S 13S (29.4V 2A)

29.4v charger for 24v li-ion battery with UK plug

Charger Parameters Output 28V 2A; Input AC 100-240 V, 50-60 Hz; Maximum power up to 56 W; Connector Size 3-pin XLR connector(1 +, 2-); Battery Type lead acid battery Note 24V is the battery voltage and 28V is the charging voltage.

*The warranty for the battery is 18 months, the charger is 12 months. If you have any questions before or after purchase, please feel free to contact me via the order page.

MULTIFUNCTIONAL CHARGING The multifunctional electric scooter charger has 5 charging heads with different interfaces, which can charge electric scooters with different interfaces. The input parameters of the charger are AC100-240V 50 60Hz, the output parameters are DC 29.4V2A. High current fast charging, greatly shorten the charging time. Suitable for 24V Lithium battery

11

The charger lights 2 bulbs when charging and one marked "Run" when charging is complete

Specification Input 100-240V, 50 60Hz; output 24V 5A, the maximum output is 29V 5A. DC connector plug size male 3-pin XLR. Also compatible with 24V 1A, 24V 1.5A, 24V 1.8A, 24V 2A, 24V 3A, 24V 4A.

48V 2A Electric Bike Battery Charger Output 54.6V 2.0A, Input AC 100-240V; Lithium battery Volt 48V; Maximum Power 110W; Cable Length 2m; Plug Size 5.5 x 2.1mm (Outer Diameter X Inner Diameter); Note Please check the interface size before purchase.

Multiple Protections Electric scooter charger light, small, stable, high-efficiency, safe, etc. The built-in intelligent protection module OVP (over voltage protection) OCP (over current protection) OTP (over temperature protection) SCP (short circuit protection), and take care of your charging equipment.

* BMS board protection The BMS board is equipped with overload protection, anti-discharge, overvoltage protection, overcurrent protection, short circuit protection, high temperature protection, etc. Our lithium-ion batteries have been tested thousands of times to ensure they are safe so you can use them with confidence.

Charge Parameters Output 54.6V 2A; Input AC 100-240 V, 50-60 Hz; Maximum power up to 110 W; Connector Size 3-pin XLR connector(1 +, 2-); Note 48 V is the battery voltage and 54.6 V is the charging voltage.

111

Connector 3-Pin XLR, Positive and negative(1+,2-), Diameter 18 mm, Indication Light Green(full), Red(charging), it stop automatically when the battery is full

L-faster

Get Moving, Quicker- Unlike others, our Mobility Scooter Chargers come with rapid charging technology and an LED light to let you know when your Mobility Scooter or E-Bike is charging or charged. Allowing you to get back on the move in no time!

Test results will be affected by test conditions (such as temperature, line loss, test equipment, test parameters, etc.), please perform multiple tests and take the average of the results to reduce the deviation.

36V 2A Electric Bike Battery Charger Output 42V 2A, Input AC 100-240V; Lithium battery Volt 36V; Maximum Power 84W; Cable Length 2m; Plug Size 5.5 x 2.1mm (Outer Diameter X Inner Diameter); Note Please check the interface size before purchase.

Test results will be affected by test conditions (such as temperature, line loss, test equipment, test parameters, etc.), please perform multiple tests and take the average of the results to reduce the deviation.

* Long service life The electric bicycle battery can be charged more than 1000 times, and the service life can reach 3 years.

Battery Charger 48V-52V - Output max. 58.8V, 4A, input 110-240Vac, speed of 4A, faster charging to save time. 58.8V 4A, suitable for a lithium battery 48V 14S. Not compatible with lead-acid batteries. Before purchasing, make sure the battery voltage matches the rated input voltage of the charger