Upromax Two Pack 4 AA Battery Holder for Metal Detectors Garrett: GTA, GTAx, GTX, GTP GTI PRO Gold at Pro/Gold and ATX snap Connector 6V Output Type BH342 2 Pack
Show on Amazon
Show on Amazon
Offer
£ 18.88
£ 5.64 | 1-2 Days
go to shop
Price trend
Product description
- Holder Made Of ABS Plastic With Nickel plated springs to hold the batteries tight in place
- Battery holder high quality Holds 4x AA Batteries for metal detectors
- Holds 4 x 1.5V AA Batteries, Provides 6V Output When Used With Alkaline Batteries, 4.8V When Used With Rechargeable AA
You might also be interested in these arduino rechargeable batteries pack.
Digislider 12 volt power 8 AA battery holder case with 2.1mm x 5.5mm DC Plug and On/Off Switch 12V battery pack | for CCTV, DIY, Arduinos, motors, solenoids, LED strips (1 pack Fast Delivery)
12v battery pack. Dimensions 127mm x 71mm x 19mm (5in x 2.8in x 0.76in)
Check price
EEMB Lithium Polymer battery 3.7V 1100mAh 603449 Lipo Rechargeable Battery Pack with wire JST Connector-confirm device & connector polarity before purchase
Make Sure Device Polarity Matches with Battery Pack Connector Before Purchase!!!-1.Battery Size; 2.Connector Model; 3.Connector Size; 4.Connector Polarity - THIS IS NOT UNIVERSAL!!! (It will cause a shortage if the polarity of the battery connector does not match your device.)
Check price
EEMB Lithium Polymer battery 3.7V 2000mAh 103454 Lipo Rechargeable Battery Pack with wire JST Connector for Bluetooth Speaker and Dashcam-confirm device & connector polarity before purchase
RELIABLE PERFORMANCE No leaking, excellent cost performance and long cycle life. PCM protection function over charge, over discharge, over current, short circuit protection, over temperature protection.
Check price
XINLANTECH 3.7v 5200mAh Rechargeable Lithium-ion Battery Pack w/PH2.0/2P Plug for Bluetooth Speaker, Lighting and More Electronic Devices 18650 1s2p Batteries Pack
This 3.7v 5200mah rechargeable lithium battery pack is made of 2 balanced 2600mAh cells for a total of 5200mA capacity. The cells are connected in parallel and spot-welded to a protection circuit that provides over-voltage, under-voltage and over-current protection.
Check price
Yangers rechargeable NI-MH 5S AA battery pack 6V 2400mAh SM 2P 2 pin plug female connector with USB charger for RC car off road truck jumper Vehicle Drift Monster Toys
Note make sure your device has compatible connector and the same size and voltage before making a purchase.
Check price
RAKSTORE ESP8266 ESP32 Power Supply Rechargeable Dual 16340 Lithium Battery Charger Shield Module for Arduino
The charging interface is micro USB, and the charging tool is very convenient to obtain (such as for Android mobile phone adapter). When it is stopped, it is recommended to turn off the power output and let the mobile power supply enter the standby state, thus saving limited battery energy.
Check price
AZDelivery 18650 Lithium Li-ion Battery Expansion Shield 5V – 3V Micro USB Module 600mA 3V/1A 5V/3A for ESP32 ESP8266 compatible with Arduino (Pack of 3) Including E-Book!
3x AZ-Delivery 18650 Battery Expansion Shield.
Check price
JJoias Rechargeable Lithium ION Battery Pack - 3.7V 6600mAh (3 X Icr18650 2200 MAh Parallel 18650 Batteries) 3.9 Inch (10cm) Cable JST PH Female Connector
1 YEAR SHELF-LIFE WARRANTY, 3 MONTH USE WARRANTY- With 500-800 charging cycle life you can be confident that this battery will provide the power you need!
Check price
FTONOM5 10PCS 9V Battery Connector PP3 T-type Battery Connectors with 15cm Flying Leads for DIY, Motors, Arduinos, Multimeter, LED Light
Features 9v battery connector with low resistance, efficient connection, flexible use and long life. you can easily replace a broken battery connector on your electronic device, improve its performance.
Check price
Upromax Two Pack 4 AA Battery Holder for Metal Detectors Garrett: GTA, GTAx, GTX, GTP GTI PRO Gold at Pro/Gold and ATX snap Connector 6V Output Type BH342 2 Pack
Holder Made Of ABS Plastic With Nickel plated springs to hold the batteries tight in place
Check price