EGLO Pendant lighting Tarbes, ceiling light fitting made of brushed brass, metal hanging lamp for dining and living room, E27 socket, Ø 6.9 inches
Product description
- The metal pendant light in brushed brass with a diamond-shaped wire shade blends seamlessly into the modern trend
- Dimensions height 130 cm, diameter 17.5 cm
- No bulb included; the illustrated filament LED bulb is sold separately under EGLO 11521; suitable for any bulb with E27 socket, maximum 60 watts per socket; dimmable depending on the bulb used
You might also be interested in these brass table lamp fittings.
ElekTek Special Safety Switch Lamp Bulb Holder B22 BC Bayonet Shade Ring, 10mm/M10 x1 Bottom Entry, Brass, Child Safe Switch Push Bar Locks Off to Cut Power if lamp Bulb not Inserted - Made in UK
Suitable for lighting circuits only - T2 temperature rating (220 C). Fully approved to BS 7895 1997
Check price
Brass switched lamp holder Kit BC fitting c/w base plate adaptor & reducer
Brass Bulb Holder
free shipping
Check price
ElekTek Unswitched Lamp Holder B22 BC Bayonet Cap with Shade Ring 1/2" 26TPI Threaded Bottom Entry - Made in UK - Brass
Standard UNSWITCHED B22 (22mm) BC Bayonet Cap Lamp Holder with shade ring - suitable for bulbs up to 200W (for SWITCHED B22 version, ElekTek Safety Switch available in separate listing)
Check price
ElekTek Premium UK B22 Lamp Refurbishment Fixing Kit, Solid Brass Safety Switch Bayonet Lamp Holder, Comprehensive Fittings Pack, 13A Plug (3A Fuse), Gold Twisted Braided Fabric 3-Core Lighting Flex
REMEMBER All electrical work should be undertaken by persons competent in the wiring and installation of these items - If in any doubt, please consult a qualified electrician
free shipping
Check price
ElekTek Brass B22 Batten 52mm Base BC Bayonet Cap Lamp Holder with Shade Ring, NOT for BESA Conduit Box - Made in UK
Ceramic interior with Earth terminal and brass plunger contacts
Check price
ElekTek Brass Back Plate Kit - 10mm Male Thread and Screws with Cover - Antique Brass - Combine with E27 10mm Lampholder
Important Facts - Back Plate Dimensions 25.4mm Diameter Brass Back Plate with 3 Screws. Screw holes 17mm centres Height 9mm. 27mm diameter Back Plate Cover
Check price
ElekTek Unswitched Lamp Holder Brass B22 BC Bayonet Cap & Shade Ring with CNC Solid Brass 7/16th Screw-in Wood Mount - Made in UK
Standard UNSWITCHED B22 (22mm) BC Bayonet Cap Lamp Holder with shade ring - suitable for bulbs up to 200W (for SWITCHED B22 version, ElekTek Safety Switch available in separate listing)
Check price
ElekTek UK B22 Lamp Refurbishment Fixing Kit, Solid Brass Unswitched Lamp Holder, Inline Rocker Switch, Extensive Fittings Pack, 13A Plug (3A Fuse) Gold Twisted Braided Fabric 3-Core Lighting Flex
Extra components are provided to ensure maximum compatibility with existing parts - to ensure electrical regulations are met two types of strain relief are provided
free shipping
Check price
ElekTek Premium UK B22 Lamp Refurbishment Fixing Kit, Solid Brass Safety Switched Bayonet Lampholder, Extensive Fittings Pack, 13A Plug (3A Fuse), Gold Round Braided Fabric 3-Core Lighting Flex Cable
REMEMBER All electrical work should be undertaken by persons competent in the wiring and installation of these items - If in any doubt, please consult a qualified electrician
free shipping
Check price
ElekTek B15 SBC Brass Fixed Batten Miniature Lamp Bulb Holder Shade Ring - NOT SUITABLE for B22 Lamp/Light Bulbs - Made in UK
MADE IN THE UK
Check price
ElekTek Premium UK B22 Lamp Refurbishment Fixing Kit, Antique Brass Safety Switched Bayonet Lampholder, Extensive Fittings Pack, 13A Plug (3A Fuse), Brown Twisted Braided Fabric 3-Core Lighting Cable
Perfect for creating a new lighting project or refurbishing an old table lamp (2.5m of 6A lighting flex).
free shipping
Check price
K M Electronics® Antique Brass LAMP Light Bulb Holder BC Bayonet Cap 10MM Screw Thread
WITH SHADE RING AND EARTH TERMINAL
free shipping
Check price
ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap with Shade Ring - 10mm/M10 x1 Threaded Bottom Entry - Bronze - Child Safe Switch Push Bar locks OFF when bulb not inserted. Made in UK
Suitable for lighting circuits only - T2 temperature rating (220 C). Fully approved to BS 7895 1997
free shipping
Check price
ElekTek Premium Lamp Kit Brass Plain E27 Lamp Holder with Round Gold Flex, In Line Switch and 3A UK Plug
Perfect for creating a new lighting project or refurbishing an old table lamp - PLEASE NOTE This Kit with Plain E27 Lamp Holder is NOT SUITABLE for use with lamp shades - please see E27 with Shade Ring Kit to use with lamp shades
free shipping
Check price
ElekTek Safety Switched Lamp Bulb Holder B22 BC Bayonet Cap Shade Ring, Brass, CNC Back Plate Mount Cover & Screws Made in UK - Child Safe Switch Push Bar Locks Off & cuts Power if no Bulb Fitted
25mm Diameter back plate nipple base plate with 27mm diameter cover and 3 screws
Check price
ElekTek UK E27 Brass Shade Ring Edison Lamp Refurbishment Fixing Kit, Gold Round Braided Fabric 3-Core Lighting Flex Cable, Inline Rocker Switch, Extensive Fittings Pack, 13A Plug (3A Fuse)
REMEMBER All electrical work should be undertaken by persons competent in the wiring and installation of these items - If in any doubt, please consult a qualified electrician
free shipping
Check price
ElekTek B15 SBC Brass 10mm Entry Miniature Lamp Bulb Holder Shade Ring - NOT SUITABLE for B22 Lamp/Light Bulbs - Made in UK
SBC (B15) Miniture Bayonet Cap Lamp holder with 10mm M10x1 bottom threaded inlet - complete with shade ring, earth, ceramic wiring insert with sprung brass plunger contacts and made from solid brass
free shipping
Check price
Switched Lamp Holder Brass Bayonet Cap (BC) (B22d) 10mm Screw Thread
Thunderfix
Check price
ElekTek UK E27 Lamp Refurbishment Fixing Kit, Antique Brass Plain Edison Lamp Holder, Inline Rocker Switch, Extensive Fittings Pack 13A Plug (3A Fuse) Brown Twisted Braided Fabric 3-Core Lighting Flex
UK Manufactured Solid Brass E27 Edison Screw (ES) lamp holder in Antique Brass finish complies with BS EN 60238 Safety Requirements which all E27 Lamp Holders are required to comply with for use in the UK EU, 1 2" threaded bottom inlet (26TPI)
free shipping
Check price
SES E14 Lamp Holder 10mm Entry Small Edison Screw Earthed Plain Skirt Cord Grip
SES E14 Small Edison Screw Cap
Check price