NICEYRIG HDMI Cable Lock Clamp for DSLR Camera Cage Applicable for Sony A7RIII A7RIV A7SIII A7III A9 A1 A7RM4A-438

COMPATIBILITY The HDMI Cable Clamp Lock 3637 is specially developed for SonyA7R III, A7 III, A7R IV, A7 II series cage 2087C 2096D 2103C CCS2629 2098 CCS2416 2014; for Panasonic S1, S5 Series cage 2983,CCP2345; for Fujifilm X-S10 cage 3087.

SECURE LOCK - This clamp is designed to prevent the camera's HDMI cable from accidentally loosening. It is attached to the side of the SMALLRIG a7siii cage with a 1 4"-20 screw and two anti-twist pins

Spring Rebound Convenient and swift to clamp and release cables by spring rebound

Adapter Cable (D to A) SmallRig Ultra Slim 4K Adapter Cable (D to A) 3021 is a high-quality adapter cable (Micro Male to Full Female) for your camera setup. You can use an Type A cable with your camera cage or rig with this adapter cable.

This HDMI data transmission Cable Clamp provides 2 M5 threaded holes for attaching screws for locking USB Cable

Designed for Sony FX30 FX3 The FX30 FX3 cage features modular design, including a NATO rail module and a U-shaped cage module. The NATO rail is secured on the top via two 1 4"-20 screws and allow connecting the original XLR top handle after disassembly; the U-shaped cage module is fixed via 1 4"-20 screws on both sides and the bottom to prevent twisting. The package comes with a dedicated HDMI cable clamp to protect the interface and ensure the signal stability during shooting.

HDMI Cable Clamp The HDMI cable clamp, which is mounted on the left side of the cage with a 1 4"-20 screw and two fixing pins, prevents bending and fixes cables with a thumb screw to protect interfaces and ensure stable signal transmission. NOTE This cable clamp is not compatible with Sony Alpha 1

For Sony ZV-E10 II SmallRig ZV-E10 II Cage Kit 4867 is specifically designed for Sony ZV-E10 II. The overall adopts hollow design, which does not affect the normal use of camera functions. The position of the battery compartment is designed with an opening and closing wrench, which better fits the curve of the body, solves the problem of placing the little finger, and enhances the grip of the camera

Anti-Twist Design The full cage fits for Sony A7C II A7CR so well, locks the camera via one 1 4"-20 screw and one M2.5 screw, which maintains full access to its ports, controls, battery compartment, and provides protection for your handheld shooting. Note Please remove the strap ring on the camera's right side before installing cage. Please refer to user manual for installation.

Stable and Durable SmallRig 10 inch magic arm with super clamp KBUM2732 is designed for work with a wide range of camera accessories. Made of aluminum alloy and stainless steel, sturdy and durable.

Better Security and Stability Triple lock tightly via a 1 4 -20 screw, a positioning pin at the bottom, and an M4 screw at the left strap slot are used to prevent your camera from twisting. In addition, the thumb-screw HDMI & USB-C cable clamp can prevent accidental disconnection and ensure stable signal transmission.

ULTRA-SLIM CABLE FOR UP TO 4K@60HZ VIDEO It's 2.0 version and supports resolution up to 4K@60HZ and will be backward compatible. The adapter cable features a female Type A connector on one end and a male Mini Type C connector on the other end to fit a variety of cameras.

Compatibility This camera handheld cage kit is specialize design for Sony FX3 FX30 to protect camera and provide accessory mounting points. The NATO Rail is fixed by two 1 4"-20 screws, and can be compatible with the original XLR after disassembly; the U-shaped cage module is fixed by 1 4"-20 screws on both sides and the bottom, which is stable and does not deflect. The kit includes a cage, NATO Rail, XLR handle extension, cable clamp for HDMI and wrist strap.

For Sony A 7R V A 7 IV A7S III Camera SmallRig Basic Kit 3708 is designed for Sony Alpha 7R V Alpha 7 IV Alpha 7S III. It includes a cage, an HDMI cable clamp and a top handle. The basic kit can protect camera and facilitate low-angle shooting.

Multiple Accessory Mounting Points The cage, top handle and side handle equipped with several 1 4"-20 threaded holes for Ball Heads Magic Arm 3873, cold shoes for microphone, LED video light, and several 3 8"-16 locating holes for ARRI for Mini Side Handle 2914. Also, the NATO rail can add versatility to the cage.

NATO Top Handle The top handle connects to the cage via NATO clamp, which can be quickly disassembled. The ergonomic design enhances the experience of grip for the fuselage. The top handle makes the cage kit easier to carry and facilitates low-angle shooting.

Quick Release Plate for Arca The QR plate at the bottom is compatible for DJI RS 2, RSC 2, RS 3, RS 3 Pro, quick release plate (height increase pad) and plate for Arca 3154. The cage also features strap holes on both sides and the bottom, which are compatible with Hand Strap 3848, Shoulder Strap PSC2428, etc. The bottom QD socket to install QD shoulder strap, and a magnetic wrench is included for easy disassembly and assembly.

Cage Kit with Silicone Grip & Cable Clamp - The included silicone handgrip on the side of the cage offers an ergonomic handle. Besides, the cable clamp for HDMI attaches to the left side of ZV-E1 using a 1 4"-20 thumb screw and two anti-twist pins to protect the port for HDMI and ensure stable transmission.

Quick Switch Design Built-in quick release plate for Arca-Swiss at the bottom is compatible with RS 2 RSC 2 RS 3 RS 3 Pro, enabling quick switch between gimbal and tripod shooting. It's also compatible with for Arca-Swiss quick release plate 3154. The strap holes on the left and at the bottom of the cage are compatible with the hand strap (ID 3848), shoulder strap (ID PSC2428).

Quick Release Structure - The cage has built in cold shoes, NATO rail, and quick release plate for Arca. They are self-locking with just a touch of a button and smoothly slides in to enhance the efficiency of disassembly and assembly.