Glass Cutter for Thick Glass Greenhouse Glass and Glass Tiles, 2 Tools in 1 Glass Scoring Tool and Glass Breaking Tool with Glass Cutting Oil, Cut Picture Frame Glass to Aquarium Glass Sheet 1-22mm

Product description

• GLASS CUTTER - Watch Glass Cutting Videos and Read All Included Tips And Instructions. Must Soak Glass Cutting Tool Wheel in Glass Cutting Oil, Run Wheel Up And Down A Board To Check Wheel is Spinning Freely So It Can Score Glass Evenly If Glass Cutting Blade Stops It Will Not Score. Glass Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Stick and Drag Across And That Stops it Being a Good Glass Scorer. Practice On Scrap Glass Sheet Before Making Final Cut To Check You Have Technique Down.
• CUT STRAIGHT LINE IN GLASS Place Glass Sheet On A Board At Waist Height, Scoring Glass on A Soft Carpet, Scoring Too Hard or More Than Once Will Cause Glass To Shatter When You Go to Break Glass. Draw A Line On Glass With A Marker, Follow Line By Pulling Cutter Towards You, Never Push Away, Watch The Back Of The Glass Cutter Wheel to Keep on Line or Use Flat Side Of Glass Cutting Wheel To Run Along A Very Smooth Straight Edge Guide At Least 2mm Thick, Guide Can Be Taped Down To Prevent Moving.
• BREAKING GLASS Place Running Pliers Breaker Of Glass Cutter Dead Center Over Score Line, Lift Glass And Squeeze Handles Ever So Gently. Over Squeezing Can Chip Edges Of Glass. Large Glass Sheet Use Piece Of Wood Under The Score Line And Bend Glass Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Glass Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edge, Less May Be Possible Off Edge With Practice.
• CUTTING GLASS TILE Glass Mosaic Tile On A Sheet Are Difficult To Cut With A Wet Saw It Chips Edges, The Glass Cutters Tool Is The Best Glass Tile Cutter It Cuts Cleaner Than Any Other Glass Tile Cutting Tool. Sheet Can Be Scored In One But Glass Tiles Must Be Split 1 At A Time, All Glass Tiles Are Different, Practice With Glass Cutter, Start Scoring Firm Pressure, Gradually Lighten It To Get To A Stage Where You Are Scoring Just Firm Enough To Score Glass But Hard Enough The Glass Tile Breaks.