Tahikem 4 Set Swivel Levelling Feet, M10 Height Adjuster Furniture Levellers Foot With T Nut Bolt, Table Leg Extenders, Screw In Bed Table Chair Self Levelers Legs 2" Base Dia 2" Thread Length Silver
Show on Amazon
Show on Amazon
Colour: Silver - 4 Set Swivel Leg
Offer
i
£ 11.99
£ 4.49 | 1-2 Days
go to shop
Product description
- Non-Slip Pad & Excellent Quality The non-slip base is 2" (50mm) wide and made of hard plastic. Comes with 2 types of anti-slip pads, choose to stick according to the floor material. (A. Felt pad to prevent scratching the floor; B. Rubber pad to prevent furniture from sliding). Sturdy 1" (25mm) T Nut base and fully adjustable 2" (50mm) screw bolt for maximum support and adjustability.
- Height Adjustment The M10 swivel furniture levelers help adjust the height and stability of furniture. After installing Tahikem swivel leveling feet, it allows you to adjust the furniture height from 3 4" (19mm) to 1-1 2" (38mm) and angle to the floor from 90 to 70 , please view the dimension picture 2 for reference. Keeps your furniture from shaking, with fashionable electroplated silver surface and looks more beautiful after installation.
- Easy to Install (1) Use a 1 2" (13mm) drill bit to drill a 2" (50mm) deep hole. (2) Hammer in the insert t-nuts and screw in the swivel levelers to the right position. (3) The leg levelers include locknut to lock and stabilize leveler. (Tip To Avoid wood cracking - use a small diameter drill to start drilling, and then switch to a drill size that fits the product. Comes with installation instruction.)
- Universal Design Our swivel adjustable leg levelers can be installed on tables, chairs, kitchen cabinets, plant stands, and so on. Whenever your home or workplace needs furniture leveling assistance, our swivel leg levelers can fix it quickly while not compromising the look!
- Practical & Load Bearing This heavy duty silver leveling feet is exclusively developed and designed by Tahikem. Each leg can support 80 lbs (36kg). Practical and affordable pieces of furniture hardware make big difference to your life. Our product solution is very effective. It is not only easy and fast to install, but also the most economical for repairing unbalanced furniture.
You might also be interested in these drill bits for m10 bolt.
10 Pcs Magnetic Hexagon Socket, 6-19mm Hex Shank Magnetic Nut Setter Driver, Hex Drill Bits,1/4 Inch Magnetic Drill Bit Set, Used to Electric Screwdriver Handle Tools
Package includes 10 * Magnetic Socket Adapter Socket Set (one for each size).
Check price
Bosch 2609255440 120mm Masonry Drill Bit with Diameter 10mm
Long lifetime
Check price
5-13 mm Hex Shank Nut Setter Driver, Drill Bit Set Powerful Socket Combination Quick Change Metric Nut Driver Set 9 Pcs Impact Driver Bit Set
Easy to Use Nut setter driver, one hand operating, easy to install and avoid falling off. Laser marked size, easy to pick out for beginners.
Check price
sourcing map Quick-Change Nut Driver Bit, 1/4" Hex Shank 10mm Magnetic Nut Setter Drill Bits, 1.89" Length, Metric
Size - 10mm nut driver, 48mm (1.89-inch) total length.
Check price
Bosch Professional PointTeQ HSS Twist Drill Bit (for Metal, 10 x 87 x 133 mm, Accessories for Drill Driver)
Areas of use For making holes through alloyed and mild steel, non-ferrous metals, cast steel, cast iron and plastic
Check price
Sourcingmap 2 Pcs 1/4" Quick-Change Hex Shank 10mm Magnetic Nut Setter Driver Drill Bit, 65mm Length, Metric
Size 10mm nut driver, 65mm (2.5 inch) total length.
Check price
DeWalt DT9540QZ 10 x 160mm Extreme 2 SDS-Plus Drill Bit
New tip design ensures better bit penetration
Check price
sourcing map Combination Drill and Tap Bit, Metric M10 x 1.5 Thread 1/4" Hex Shank, Blue Nano Coated Threading Screw Taps Spiral Flute Drilling Tapping Tool, High Speed Steel (HSS) 4341
Tips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m min; harder steel 5-10m min; stainless steel 2-7m min; cast iron 8-10m min.
Check price
DOJA Industrial | Anchor Bolts M10-12 (Pack 12) with Drill bit 12 (Pack 1)
Do you need plasterboard fixings Set up a bench, fence or sheet Our metal impact anchor bolt with concrete drill does the job perfectly. With our concrete anchor, you can attach shelves, brackets, ladders, air vents, gel, worktops, wooden frames and more. The anchor s ground anchors can withstand medium and heavy loads. A drill is included to facilitate the installation of the product.
Check price
Gunpla 6pcs Tap Drill Bits Set, Durable Titanium Coated HSS Combination Metric Thread Drilling Bits Twisted 1/4” Hex Shank Hand Machine Screw Threading Tapping Tools M3 M4 M5 M6 M8 M10
HSS RUST RESISTANT MATERIAL Gunpla taps drill bits are made from improved hardness high speed steel. To improve these drill bits for tapping hardness and make them highly resistant to rust, they were finished with a titanium coating, creating a case-hardened surface
Check price
sourcing map 4pcs Combination Drill and Tap Bit, Metric M10 x 1.5 Thread 1/4" Hex Shank, Titanium Coated Threading Screw Taps Spiral Flute Tapping Tool, High Speed Steel (HSS) 4341
Tips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m min; harder steel 5-10m min; stainless steel 2-7m min; cast iron 8-10m min.
Check price
6PCS HSS Tap Drill Bit Set Metric Hex Shank Tapping Screw Spiral Point Metric M3 M4 M5 M6 M8 M10 Tap Drilling Hand Tools
Material HSS (4341) High hardness, rustproof, solid and durable; Self-centering design do not need additional center drilling or center punching
Check price
sourcing map Combination Drill and Tap Bit, 1/4" Hex Shank M10 x 1.5 Metric Titanium Coated High Speed Steel 6542 Spiral Flute Drilling Tapping Tool 2pcs
Combination Drill and Tap Bit Thread Size M10 x 1.5; Hex Shank Size 1 4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
Check price
Bestgle 6 Packs Hex Shank Titanium Coated Countersink Tap Drill Bit Set HSS Screw Thread Metric Combination Tap Drill, M3-M10
Processing wood, plastic, aluminum, tin alloy, magnesium alloy, workpiece thickness less than 5mm. NOT for Hard Metal Iron Casting.
Check price
10mm Masonry Drill Bit, Hex Shank Multi Material Drill Bits Masonry, Brick Walls, Soft Tile, Wood, Plastic, Metal
PRECISE DRILLING My Tool Expert Multi-Material Drill Bits are Up to 5 times more precise than a standard drill bit, self-centring geometry for drilling with pinpoint accuracy. Ideal for drilling holes into multiple materials
Check price
Deburring External Chamfer Tool Stainless Steel Remove Burr Tools for Drill Bit Stainless Steel Eliminate Damaged Extractor Fits Size 8-32 Bolts (Silver)
Fits Size 8-32 bolts (.164) up to 3 4 -10 (.750) - (4mm -19mm), Simple design and a compact size, means the tool is easily carried in your tool pouch. Quickly slap it into your hand drill and start repairing work pieces
Check price
Girls'Love Talk 6PCS Thread Tap Drill Bit Set Hand Tap Hex Shank Drill Titanium Coated HSS Drill and Tap Bits 1/4" Hex Shank Screw Spiral Point Metric M3-M10 Hand Tools
Products include There are total 6 pieces of drill taps in different sizes from M3 to M10, that you can be used to tap different threads to meet different drilling needs. nverting your bike
free shipping
Check price
sourcing map 2pcs Combination Drill and Tap Bits Metric M10 x 1.5 Thread 1/4" Hex Shank Nitride Coated Threading Screw Taps 4341 High Speed Steel Machine Drilling Tapping Tool Kit
Tips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m min; harder steel 5-10m min; stainless steel 2-7m min; cast iron 8-10m min.
Check price
1pcs Power Screwdriver Nut Driver Bit Sizes 16mm Hex Shank Impact Nuts Driver Drill Bits Metric Wrench Socket Bit
Feature Use the hex head driver bit to tighten and remove nuts or bolts on your vehicle, metal or woodworking projects.
Check price
sourcing map Combination Drill and Tap Bit, 1/4" Hex Shank M10 x 1.5 Metric Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 2pcs
Combination Drill and Tap Bit Thread Size M10 x 1.5; Hex Shank Size 1 4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
Check price