AZDelivery D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V compatible with Arduino including E-Book! (Pack of 5)
Show on Amazon
Show on Amazon
Offer
£ 29.99
free shipping | 1-2 Days
go to shop
Price trend
Product description
- Get a 5 piece deal of the AZDelivery D1 Mini ESP32 Development Board.
- Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications.
- 100% compatible with Arudino IDE, Lua and Micropython, it shows robustness, versatility, and reliability in a wide variety of applications and power scenarios.
- All I O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO. The included E-Book provides useful information on how to begin your project, helps with a quick setup and saves time on the configuration process.
- This product includes an E-Book that provides useful information on how to begin your project, it helps with a quick setup and saves time on the configuration process. We provide an array of application examples, full installation guides and libraries.
You might also be interested in these 5v batteries pack for arduino.
2 Pcs 8 AA 12V Battery Holder Case, 12V Power Pack with On/Off Switch & 2.1mm x 5.5mm DC Plug, Plastic Battery Storage Box for CCTV, Arduino Projects, LED Strips, Motors, DIY Electronics, Solar Panels
Reliable Power Solution This AA 12V battery holder case holds 8 AA batteries, providing a stable power supply for electronic projects, including Arduino, CCTV systems, motors, and LED strips. Ensures long-lasting power and easy battery replacement.
Check price
AZDelivery 18650 Lithium Li-ion Battery Expansion Shield 5V – 3V Micro USB Module 600mA 3V/1A 5V/3A for ESP32 ESP8266 compatible with Arduino (Pack of 3) Including E-Book!
3x AZ-Delivery 18650 Battery Expansion Shield.
Check price
4xAA Battery Pack Holder Case Box to DC Barrel Jack Connector Compatible with Arduino(Pack of 2)
The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector
Check price
ESP8266 ESP32 Dual 18650 Lithium Battery Shield V8 5V 2.2A 3V 1A Mobile Power Bank Battery Charging Module Micro USB For Arduino
PartsBeiz
Check price
SunFounder BreadVolt Breadboard Power Supply Module Built-in Rechargeble Battery Compatible with Arduino, Raspberry Pi, Pico W, ESP32, 5V/1.5A, 3.3V/1A, USB Output (Breadboard NOT Included)
Broad Compatibility "One-Stop Breadboard Power Solution" - BreadVolt Compatible with Arduino, Raspberry Pi, ESP32, Pico W, etc. BreadVolt offers 5V 1.5A and 3.3V 1A power outputs, suitable for a variety of electronic projects.
Check price
AZDelivery 18650 Lithium Li-ion Battery Expansion Shield 5V – 3V Micro USB Module 600mA 3V/1A 5V/3A for ESP32 ESP8266 compatible with Arduino (Pack of 5) Including E-Book!
Get a five-piece deal of the AZDelivery 18650 Battery Expansion Shield.
free shipping
Check price
Pack of 2 18650 Battery Shield ESP32 5V/2A 3V/1A, Micro USB Type B & Type C Connection, Battery Shield Board Micro Charger, with USB Cable, Compatible with Arduino, Raspberry Pi, Wemos
Note To use the device, touch the white button switch first. When the mode switch is set to NOMAL, the device automatically switches off for about 10 seconds and goes into standby mode. When the mode switch is switched to HOLD, the device remains on regardless of the situation until the battery is exhausted.
Check price
VooGenzek 18650 Battery Shield with USB Cable, Battery Expansion Shield 3V/1A 5V/2A, Micro USB Charger Type-B & Type-C Port, Compatible with Raspberry Pi, Arduino, Wemos
Input & Output Micro USB port Input, Type-B & Type-C USB Output, with charging current of 600mA, with power and operating mode indication via on-board LEDs.
Check price
Pack of 3 18650 Battery Expansion Shield V3 Micro USB Port, Supports Micro 5V/2A 3V/1A Output V3 Battery Protection with Cable, Compatible with Arduino, Raspberry Pi, Wemos
Portable Mobile Power Supply This power bank 18650 is a portable mobile power supply that supports the voltage outputs 3V and 5V. Input connection The module has a micro USB port with a charging current of 600mA and a power and operating mode display via on-board LED.
Check price
DUBEUYEW 3.3V 5V MB102 Solderless Breadboard Power Supply Module with 9V Battery Clip Power Cable 2.1 x 5.5 mm Male DC Jack Plug for Arduino (Pack of 6)
With 9 V battery, snap-power cable with T-plug 5.5 x 2.1 mm.
Check price
CQRobot MicroUSB Battery Holder (3xAA), Can Hold 3 AA Batteries. Compatible with Arduino Controllers with micro USB interface.
Battery box comes with a Micro USB connector, compatible with Arduino interface with a micro USB compatible controller.
Check price
GTIWUNG 20Pcs Micro USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board +10Pcs 18650 Battery Holder Case with Lead Wire Bundle
Package Includes 10 x 18650 battery case; 20 x Micro USB charging module.
Check price
Binghe XL4015 DC-DC Adjustable Buck Converter 4~38V to 1.25-36V 0~5A for Li-Ion Battery Compatible with Arduino (5pcs Pack)
buck converter this product is a powerful voltage regulator module that reduces a higher input voltage to a lower output voltage.
Check price
AZDelivery Micro USB Charging Module 1A Lithium Boost Battery Shield 5V for D1 Mini including E-Book! (Pack of 5)
This shield contains 2 pin headers each with 8 pins, as well as a USB interface for charging the battery. Thanks to its ultra-compact design, the AZDelivery D1 Mini battery shield can be easily integrated into existing projects.
Check price
DR.PREPARE 16000mAh Battery Pack with 7.4V DC (3.8mm) & 5V USB Output for Heated Vest, Faster-Charging Power Bank with Type C In/Output, Portable Compact Battery for Eye Mask, iPhone, iPad, Desk Fan
Compatibility Alert Before purchase, confirm your heated apparel uses a 7.4V 3.8mm DC plug or 5V USB plug, max output 2.5A. This battery pack is engineered exclusively for DR.PREPARE heated vests and is NOT compatible with common 3.5mm or 4.0mm DC plugs of other brand heated apparel.
free shipping
Check price
OKZU 5V 2A Power Bank for Gilet Vest Battery Pack, 10000mAh Packet Size LED Display Portable Charge for Heated Clothing, USB Heated Blanket, Coat
Notice It doesn't work with 7.4V or 12V DC input heated vest, heated jacket.
Check price
AZDelivery D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V compatible with Arduino including E-Book! (Pack of 5)
Get a 5 piece deal of the AZDelivery D1 Mini ESP32 Development Board.
free shipping
Check price
AZDelivery D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V compatible with Arduino including E-Book! (Pack of 3)
AZDelivery
Check price