Di-Log Earth Leakage Current Clamp Meter AC Leakage Clampmeter with Large Backlit Display

3.5 digit lcd display

Metrel

AC DC CURRENT TESTER This amp clamp device measures DC current as well as AC. Small current drain can be tested via the clamp, e.g. to measure a battery drain on a car, without having to disconnect any wires.

Ergonomic and lightweight Auto range, 2 3 times s sampling rate LCD backlight, data hold Auto power off, low battery indication

Upgraded intelligent mode We upgrade the amp clamp meter, which is unique in the market. The default intelligent mode when the meter is on can automatically identify AC DC voltage current, resistance, and continuity measurement signals, making the operation more convenient and safe.

Auto power off and low battery indicator

ADVANCED AC DC CURRENT LEAKAGE METER This current leakage clamp meter is designed to accurately measure automotive dark current and leakage current for quick automotive leakage current detection, power consumption current detection, motor starting current measurement, and engine charging current measurement. This versatile current clamp tester quickly identifies problems such as broken wires, leaks, and improper grounding.

100 uA (0.1mA) high resolution measurement on 200 mA range

AC DC CLAMP METER This clamp meter can accurately measure AC DC current, AC DC voltage, temperature (thermocouple included), NCV, capacitance, frequency, resistance, continuity and diode. Good help for troubleshooting the household solar system, automotive and industrial electrical issues, perfect for electricians, DIY, professionals, etc.

This Mini True RMS 6000 Counts clamp meter measures DC and AC current by jaw from 1mA to 100A, DC and AC voltage to 600V

Multi-Function Clamp Meter --- Support Measures 600A AC Current, 600V AC DC Voltage, Continuity, Diode, Temperature, Resistance and NCV. (Notice Does Not Measure Direct Current Direct Amp; Only One Wire Can Be Placed in the Jaws When Measuring AC Current)

10mm Jaw thickness

LCD Display Clamp ground resistance meter adopts great black LCD screen and resistance current display in the same screen, but also with realtime clock, data storage, data access, alarm, automatic shutdown and other functions.

TRMS 6000 Counts Multimeter Built-in clamp sensor, true RMS measurement method, can accurately measure DC voltage 0.1mV 600V, AC voltage 1mV 600V, AC and DC current 10mA 400A, resistance 0.1 60M , capacitance 6nF 60mF, frequency 9.999Hz 9.999MHz, temperature -20 C 1000 C, duty cycle 0.1% 99.9%.

TESTING CAPABILITY This plug tester detects the most common wiring faults in standard and RCD electrical outlets, which is also with the standard uk and RCD protected 225 Volt AC Outlets. Capable of detecting the open wiring fault with open ground, open hot, open neutral, reverse polarity, hot neutral reversed wires.

HOW TO USE 1. The meter will automatically calibrate when it is turned on, and it will display ol when it is finished, and it will automatically enter the resistance measurement mode. 2. Automatically shut down after reaching the set shutdown time, the meter will flash for 30 seconds before the automatic shutdown, and then press the power button to delay the switch on time.

Small in size, light in weight, compact structure, it is convenient to carry.

Attention Before testing DC current, zero out the readings several times and hold the meter in the same orientation when taking readings. Because clamp meter is use the Hall effect sensor to detect dc current.

clampmeter leakage

LOW IMPEDANCE AND NCV The low impedance function prevents incorrect readings due to phantom voltage or residual voltage. The NCV function can be activated from any function by pressing the V-Alert button.