Vortice 11100 MG 100/4" Punto Ghost Inline Extractor Fan 100mm / 4 Inch Standard

Extraction rate 70.8 (high speed) 50 (low speed) litres per second, 255 (high speed) 180 (low speed) cubic meters per hour

Dimensions 281mm high x 176mm diameter. 98mm diameter intake output connections 25mm deep

Mains voltage 220-240V AC 50Hz. Two speed options, selectable at installation

Extraction rate 22.2 litres per second, 80 cubic metres per hour

Mains 230 240V AC 50Hz. 18 watts power consumption. See product description for important information on electrical connections requirements

A quiet and efficient fan, providing excellent low energy and noise performance. Ideal for modern bathrooms and toilets. This model is for operation with the room light switch. When the light is switched on the fan comes on, when the light is switched off the fan continues to run for a pre-set time. Requires permanent live, switched live and neutral (3 wires excluding earth) at the fan position in order to operate correctly

Extraction rate 22.2 litres per second, 80 cubic metres per hour. Sound output 39dB(A) @ 3m

centrifugal extractor fan

Sound output 39.2dB(A) @ 3m (high setting)

37.5dB(A)

Dimensions 152mm wide x 152mm high x 116mm deep (visible beyond installed surface). Spigot is 96mm diameter and extends for 25mm. This fan is for connection to 100mm 4" ducting.

Dimensions 281mm high x 176mm diameter. 98mm diameter intake output connections 25mm deep

Continuously running central extract unit

Centrifugal suction for Vortice square ducts

IPX4 splashproof. Class II double insulated

Max Absorption Current (A)0.1; Rated Duct Diameter (mm)100; Frequency (Hz)50; IP Protection Grade X4; Insulation Class II; Drain Diameter (mm)99; Weight (Kg)0.6; Max Power Consumption (W)18

Centrifugal Extractor Fan. Mains voltage 230 240V AC 50Hz

Mains voltage 220-240V AC 50Hz

Mains voltage 230 240V AC. Power consumption 6 - 25 watts (low high). Continuous running in accordance with ADF System 3. Trickle and Boost speed options

This model is designed for simple switching on off from a separate switch, e.g. light switch or spur unit (not supplied). It does NOT have a run-on timer.