SMALLRIG Quick Release Clamp Compatible with Arca Standard for DJI Ronin S/Ronin SC, for ZHIYUN Crane2/ Crane3/Weebill Lab/Weebill S, for Moza Air2 Gimbals - DBC2506

Updated Version This is the new version. This compatibility problem of Arca Swiss was resolved. Two safety pins added on the quick release plate

You can also use it as a riser plate when using large diameter lens

Please Note If you find this plate is jammed when inserted into the RS 2 or RSC 2, you can adjust the tightness of the clamp using the 1.5mm Allen key and lever. Information on operation can be found in the enclosed video

Mounting ponits there is a 3 8 inch thread, three 1 4 inch thread and two continuous holes on the bottom of the base plate, so that they can be attached to the tripods or other platform

Foldable Quadruped Support It comes with four foldable standing legs that allow placing camera with a lens length of less than 5.9inch 15cm in most situation, and protect your camera and lens from scratching

For DJI RS 4 Pro RS 4 RS 3 Pro RS 3 RS 2 RSC 2 & SMALLRIG CAGES - SmallRig Quick Release Plate for DJI Gimbal 3154 is designed to attach to camera cage with two 1 4 -20 screws to fit in Gimbals for DJI RS 4 Pro RS 4 RS 3 Pro RS 3 RS 2 RSC 2, and solve the twisting issue that the original Arca Plate only allows being attached onto the cage through one 1 4 screw. The battery door of the Fujifilm X-T4 cannot be fully opened when this plate is attached to the SMALLRIG X-T4 Cage CCF2808.

Exclusive QR-Slide Patented Structure This quick release plate kit for Arca consisted of a top QR plate and a clamp for Arca, just press one button to slide the top QR plate into the groove, and lock it by releasing the button. The QR mount plate kit adopts roll pin positioning technology that roll pins fit snugly into the groove, ensuring firm locking.

Top Plate for Arca-Swiss - The included top quick release plate for Arca is compatible with DJI RS series stabilizers, enabling quick transitions between handheld, stabilizer and tripod. Besides, the top plate features two 1 4"-20 screws within its sliding slot to mount your camera or cage.

Lightweight and Easy to Carry SmallRig NATO clamp to quick release plate for Arca-Swiss is designed to enhance the vertical camera shooting experience. Weighing a mere 32g, this accessory ensures seamless portability and compatibility.

ARCA-SWISS COMPATIBLE The ball head comes with a standard Arca-Swiss compatible plate

QR Plate for Arca-Type - SmallRig Quick Release Plate 3853 is designed to provide a lightweight solution to easy and quick switch between handheld and tripod shooting. You can add this QR plate for arca-type with 15mm rod clamp to your camera rig to facilitate using a follow focus without requiring a camera cage.

Anti-off Design This mount clamp adopts two anti-off designs, which are stable, safe and efficient, and you can use it with confidence

For DJI Gimbal SmallRig Quick Release Plate for Manfrotto 4638 is specifically designed for DJI RS 2 RSC 2 RS3 RS 3 Pro RS 4 RS 4 Pro.

For DJI Stabilizers The quick release plate for Arca is specifically designed for DJI RS 4 RS 4 Pro RS3 RS 3 Pro RS 3 mini RS 2 RSC 2. Camera cages with H38 quick release plate for Arca at the bottom can slide directly into SMALLRIG 4639, for example SMALLRIG Cage for Sony A7R V A7 IV A7S III A7R IV A1 - 4481.

Removable Two-Way Handle - The pan-tilt is equipped with removable telescopic handle, which can be rotated and adjusted to make storage more compact. The adjusted length is 175mm-240mm(6.9"-9.5"). It enables you to get the best experience in overhead or elevation shot. Besides, a built-in Allen wrench helps install or remove your camera.

Multiple Mounting Options-The full camera cage 4256 features multiple mounting points, including 1 4"-20 threaded holes, 3 8"-16 locating holes for ARRI and two cold shoe mounts to add accessories such as handles, microphones, lights and monitors, etc.

Enlarged Hot Shoe Space The new version of the cage enlarges the space around the camera hot shoe, and now you can use the cage together with the Microphone ECM-W2BT for Sony, Flash HVL-F32M or other accessories that require the use of the hot shoe on the top of the camera.

For Sony ZV-E1 SmallRig baseplate for Sony ZV-E1 4314 aims to enhance the gripping experience and enable tripod and handheld shooting.

For Sony ZV-E10 II SMALLRIG Baseplate 4950 is exclusively designed for Sony ZV-E10 II, allowing for the expansion of camera accessories, improving grip, and protecting the camera bottom from scratches

"Black Mamba" Style The ''Black Mamba'' bionic design features a streamlined all-in-one shape, as a whole that gives full access to all top controls. It is designed to protect your camera and attach more accessories for DIY purposes.