YNK Pro Wire Cutter Bicycle Brake Shifter Cable Repair Tool

What You Get ----- In this kit, You will get 83Pcs Bicycle Cable and Housing Replacement Kit, Including 1Pcs Cable Cutter; 6Pcs 66.9 inch Bike Brake Cable; 6Pcs 82.7 inch Bike Shift Cable; 12Pcs O-Rings; 36Pcs End Caps; 10Pcs 5mm Brake Cable End Caps; 10Pcs 4mm Shift Cable End Caps; 1 Roll 118.1 Inch Brake Cable Housing; 1 Roll 78.7 Inch Shift Cable Housing. In total 83Pcs can meet all your needs.

This cable cutter is designed for cutting steel wire which up to 11MM , with very sharp and clean cut.

Sharp Cable Cutter This bike wire cutter is specially designed for cutting steel wire and the cutting is very precise and clean. It will not cause wear and tear to the steel wire. The wire cutter is equipped with a spring ring, which is very labor-saving and simple. You can easily cut the broken cable tear line and remove the grommet.

Wide Application Low-friction and Strong slick cable, suitable for speed control system, help you adjust speed; Convenient and easy to install. Ideal for mountain bikes, road bikes, BMX bikes, folding bikes, recreational bikes, practical accessories provide them with a good outdoor experience.

Package Included You will receive 1pc cable cutter, 8pcs silver cable end caps, 8pcs 1.7m rear brake cables, 6pcs 2.1m rear shift cables, 8pcs inside O rings, 8pcs housing brake cable end caps, 8pcs housing shift cable end caps, 2pcs 90 bend pipes, 2pcs 110 bend pipes, 4pcs rubber boots, 8pcs C clips, 1 roll 3m brake cable housing, 1 roll 2m shift cable housing, 8pcs S buckles. Total 73pcs can meet your needs for bicycle repair. The cable cutter included help adjust the length of cable.

Ergonomically cushioned grip, thumb lock, comfortable and easy to use, providing you with an excellent user experience.

Package Detail This set includes 120pcs bike brake cable end caps, which colors are black, silver, green, blue and golden, each color for 20pcs. Come with a 8 inch stainless steel wire cutter for cutting steel wire which up to 5 32 .

GOOD PERFORMANCE The surface of bike brake cable pliers is oxidized to prevent corrosion, not easy to rust, and prolong the service life.

Crimper The dual function tool includes a crimper for cable ends

Draper Quality - Reliable Draper Tools quality guaranteed

What You Get ------- In this kit, You will get 67Pcs Bike Bicycle Accessory Kit, Including 1Pcs Cable Cutter; 8Pcs Inside O-Rings; 8Pcs Line Caps; 8Pcs Black 4mm Shift Cable End Caps; 8Pcs 5mm Brake Cable End Caps; 8Pcs Black Thread tube S buckle; 8Pcs Black C-clip; 1Pcs 5mm Brake Cable Tube(3m); 6Pcs 5mm Shift Cable Tube(2m); 6Pcs General Front Shift Cable Wire (1.7 m); 1Pcs General Rear Brake Cable Wire (2.1 m); 2Pcs V Bike brake noodle cable guide pipe; 2Pcs Plastic hose.

LIGHTWEIGHT CONSTRUCTION This compact, pocket-sized Cable Cutter is ideal for taking out & about with you - weighing just 23 grams you can cut cables perfectly wherever you are

Wide Applications The steel wire cutter cutting plier is suitable for bicycle brake line pipe, transmission line pipe, wire and so on.

Instructions for Use The bike cable pliers can be operated with one hand, use thumb to adjust the tension, can easily pull the inner cord of a brake line or cord. Bring you a comfortable and convenient experience.

Cuts inner and outer bike cables

HIGH QUALITY MATERIAL This bicycle brake spoke wire cutter is made of qualified steel, solid and firm, surface oxidation treatment, anti-corrosion.

Use Press the barb a few millimetres into the hydraulic brake hose end. Clamp the hydraulic hose and tighten it. Slowly screw in the needle tool and insert the barb completely into the hydraulic hose. When fully inserted, loosen the hose clamp and slide the barb out of the needle tool. Perfectly designed for bicycle hydraulic hose tool for bike shop.

Application Ideal for tensioning the inner and outer brakes shifters when adjusting bicycle brakes and derailleurs, this is an incredible tool for professionals, bicycle enthusiasts, workshop and home mechanics.

High-quality material Our bicycle hydraulic brake press tool is made of high-quality nylon material. It is finely processed and has a smooth cutting effect. This makes it easy to control and operate. The tool is sturdy and durable, so it can be used for a long time without being easily deformed.

Two Uses 1. Used for bike hose cutting, with sharp slices. 2.Needle head assisted positioning, static insertion, convenient switching between double heads.