Natural Stone Sealer Breathe (5 Litre)

Show on Amazon

Offer

i

Product description

  • SAFE FOR SEALING HISTORIC FLOORS Suitable for sealing new and old floors which have no damp proof membrane present. This breathable sealer will seal both the stone and associated pointing or grout lines without trapping moisture. Safe to use within listed buildings as the sealer does not form a film or skin on the surface of the stone. Natural Stone Sealer does not alter the appearance of the stone.
  • EASY TO APPLY This natural stone sealer is easy to apply, inside or out. It is water-based, low odour and dries rapidly. Simply apply with a sprayer, roller, or brush. Touch dry in approximately 30 minutes and is fully waterproof after 24 hours. This sealer lasts 4-5 years and can be reapplied when some porosity to the stone is noted. Apply the product twice, approximately 40 minutes to hour apart. Remove any excess product after 20-30 minutes has elapsed after each application.
  • STAIN RESISTANT & SOLVENT FREE This effective stone sealer contains high active resilient polymers. These durable polymers resist water and oil-based staining whilst retaining the natural appearance of stone. The application of this sandstone sealer helps your pavers, flagstones & tiled floors resist oil and water-based staining and inhibits organic growth. Natural Stone Sealer Breathe does not contain solvents or VOCs so is low odour.
  • SUITABLE FOR USE ON Kandla grey sandstone, colourful sandstones, slate, Yorkshire sandstone flagged floors, travertine & limestone. Any floor where you do not wish to alter the appearance of the stone being sealed. Can also be applied to tables, fireplaces & ornaments.

You might also be interested in these primings slurry for porcelain paving.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.