LINKUP - [Active Chip USB 3.0 (3.2 Gen 1) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

Product description

• *** Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket.
• Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header NOTE Does not convert from 5GB s to 10GB s. Not compatible with USB 2.0 motherboard IDC connector
• Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2); including attach removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode.
• *** Note on USB current over limit issue The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components. Not compatible with iPad Pro and other tablets for charging through this port.