Taikuwu DC 5V-24V Mini 4A PIR Infrared Motion Sensor Detector Switch for 3528 5050LED Strip With Female Male DC Power Connector

Intelligent PIR Detection With PIR motion detector, it can detect human movement by detecting infrared rays emitted by the human body. Intelligent detection, it will automatically delay to turn off after the person comes out

With intelligent perception , the shutdown is automatically delayed after the person has left.

Operating voltage range DC 5-20V; Compatible with Arduino, Raspberry Pi and more.

AZ-Delivery HC-SR501 is a device that detects human motion and it is based on infrared technology. IR Motion Detector features automatic control module, 5V of operating voltage and low power consumption of 65mA.

PIR motion sensor can detect human movement by detecting infrared ray emitted by human body.

???? Motion Sensor Switch PIR motion sensor can detect human movement by detecting infrared ray emitted by human body. Support infrared human body induction, sensitive response and intelligent control.

Connector type DC5.5*2.1,Sensing distance 3-8M,Operating voltage DC 5-24V,Load current

About the product LED motion sensor switch output current

PIR Sensor Switch Infrared human body sensor which can achieve automatic control functions, it can detect human movement by detecting infrared ray emitted by human body.

This PIR motion sensor is an infrared human body sensor switch, which is controlled by motion and is widely used in LED strips, sports lighting, human body monitoring, auto-matic sensing devices, etc. The sensor only functions properly when the surrounding light is below 10LUX, such as during nighttime or in darker environments. When people enter the sensor's detection range under these conditions, it will activate. However, if the light is too bright, the sensor will not work.

STABLE SENSITIVITY SENSOR Built-in temperature compensation chip, reducing the impact sensing distance by the temperature. 120 degrees cone angle detecting range. High and stable sensitivity, effectively save energy and improve efficiency

This PIR motion sensor is an infrared human body sensor switch, which is controlled by motion and is widely used in LED strips, sports lighting, human body monitoring, auto-matic sensing devices, etc. The sensor only functions properly when the surrounding light is below 10LUX, such as during nighttime or in darker environments. When people enter the sensor's detection range under these conditions, it will activate. However, if the light is too bright, the sensor will not work.

Intelligent sensing, it will automatically delay to shut down after the person leaves.

PIR motion sensor can detect human movement by detecting infrared ray emitted by human body.

ADJUSTABLE DAY AND NIGHT SENSOR AND TIME ADJUSTABLE With an IP65 rating, you can rely on the guardian outdoor light to work in temperatures of -24 C to 40 C, and in any weather

PIR Infrared Motion Sensor Switch installation must first cut off the power supply to prevent a short circuit in the installation process. Choose a good location for installation, do not install in places where direct sunlight can be directed or where airflow is smooth, these places will hinder the work of infrared sensing.

USB Port - USB port make it convenient and simple to standby. Power supply via mobile phone, charging bank or other devices with USB port, Output voltage is equal to input voltage, low power consumption.

SEBSON Mini PIR motion detector for indoor, dimensions switch 56x37x26mm and Sensor 18x25mm, 3-Wire.

Trigger Way Continuous triggering,Light Sensor 10LUX

Operating voltage DC 5V - 24V