PC Fan Speed Controller,4 Channel Computer Fan Speed Temperature Controller Heat Reducing for PC,with Blue LED Which Displays The Working State Of The Speed Controller

Small size suitable for all types of computer cases, magnetic design, easy to install, takes up little space, external knob, more convenient speed adjustment

The Commander FT helps you keep an eye on temperature, showing you information down to the selected fan speed (RPM).

Please note The governor has a power limit, a single port can support a maximum current of 0.7A, it cannot be used beyond the standard, and a single fan with a power exceeding 10W cannot be connected, otherwise the product will be easily damaged

No stop mode prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors

Easy to install Double-sided adhesive for easy installation and more stable standing in the surface.

Easy to install PC 3 Channels Fan Hub The governoris installed in the PCI position of the chassis, which can be more convenient for your adjustment, use and installation.

Effectively for heat reducing, maintain the proper temperature to keep all parts of the computer running well.

11.8in Cable This PC fan 12V speed controller comes with 300mm 11.8in extension cable, provide higher flexibility between motherboard and fan.

Desktop computer use The product supports the 3 in 1 function of PWM intelligent temperature control, 5V ARGB motherboard synchronization plus wireless remote control. It use the direct SATA Power Input, support 8 PWM temperature interface (4-pin) + 10 ARGB 5V interface (3-pin), greatly improved the expansion capability. Bottom magnetic suction design, which is easy for the installation.

EXCELLENT PERFORMANCE Intelligent detection of computer temperature, when the computer CPU temperature is too high or the detection point temperature is too high, automatically reduce the movement and increase the fan speed, when the computer idle or detection point in the standard range of automatic fan speed, reduce fan noise.

PWM Speed Controller This PWM fan speed controller adopts PWM control technology to realize temperature control and speed regulation. The fan speed can be controlled according to the tested temperature. The higher the temperature, the faster the speed, the lower the temperature, the slower the speed

High performance cable management The product is not only a hub for ARGB lighting signals, but also a hub for PWM fans, supporting the installation of 8 ARGB fans and 8 PWM fans at the same time, with 4 lighting connectors and fan power connectors on each side, one plug can be used to keep the ARGB fan lighting and PWM fan cables tidy (Note 12V 4PIN RGB interface devices are not supported and cannot be plugged in)

Glue Fixation - The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis.

Fast and Effective Cooling This PC fan speed controller can Effectively for heat reducing, maintain the proper temperature to all parts of the computer running well.

Easy to install The speed governor can be connected to 8 way fans, 4 knobs control the speed, and one knob controls two fans.PC 8 Channels Fan Hub The governoris installed in the PCI position of the chassis, which can be more convenient for your adjustment, use and installation.

Widely Compatible Works with 4 pin and 3 pin fans. If the fan does not support the PWM speed control function, the speed control function is invalid. The total current connected to the fan must not exceed the maximum current value of 17A to avoid damage to the governor.

Wireless Remote Control Wireless remote control switch can freely switch between host mode and remote control mode, and easily adjust fan speed (S M H) lighting effect brightness LED speed with one button without opening the case.

What it does The USB fan speed controller realizes stepless speed regulation and switch function by connecting the fan.

Please note The governor has a power limit, a single port can support a maximum current of 0.6A, it cannot be used beyond the standard, and a single fan with a power exceeding 10W cannot be connected, otherwise the product will be easily damaged

Easy to install PC 8 Channels Fan Hub The governoris installed in the PCI position of the chassis, which can be more convenient for your adjustment, use and installation.