YURROAD 40" x 12" Black Iron On Vinyl - Heat Transfer HTV for Fabric - Easy to Cut & Weed

Show on Amazon

Offer

Product description

  • CUTTING FROM COLOURED VINYL SURFACE - Please *NOTE when cutting out patterns, must be cut from colored vinyl sheet (without clear protective film). And when you weed out the extra part, if the blade is dull, it needs to be replaced. FOLLOW the instructions, the heat transfer vinyl will EASY TO CUT & WEED!!! If you're green hand, please cut a small piece of HTV vinyl to practise more time.
  • COLD PEELING AFTER 45 SECONDS - When the HTV vinyl iron on clothing is complete, please wait 45 seconds for it to cool before peeling off the clear protective film. And wait for 24 hours before the first wash, do not dry clean, do not bleach, do not wash in hot water. If you have any problems in the process of heat transfer vinyl, please feel free to contact us!
  • TEMPERATURE, PRESSURE & TIME REQUIREMENTS - Heat transfer HTV vinyl to target surface, apply pressure 3KG 6.61lbs at 300 F-320 F(150 C- 160 C) for 10-15 seconds. When you're using vinyl iron on fabrics, please note that different temperatures and pressures are used for different fabrics.

You might also be interested in these slicker irons on vinyl.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.