Wireless Remote Control Momentary Switch System Transmitter & Receiver with Receiver Relay Smart House Equipment for Home Garage Doors Use DC12V 4-CH 433MHZ

Great design 433Mhz RF wireless remote control switch.Stable and reliable performance with high reception sensitivity ( 97dbm). Strong signal can pass walls, floors, doors.It can be controlled within 50 meters distance with no obstacle.

433Mhz RF Small and the performance is stable and reliable, high sensitivity, signal can pass through walls, floors and doors. Range up to 50m 164ft in open space.

suitable for CAME gate drives receivers with 433,92 Mhz

Up to 400 hand transmitters programmable.

Great design 433Mhz RF wireless remote control switch.Stable and reliable performance with high reception sensitivity ( - 97dBm). Radio frequency signal transmission.Strong signal can pass walls, floors, doors,board and so on.It can be controlled within 50 meters distance in open area. The code of the chip is EV1527 learning code which is the most popular technology that make the remote control system more security.

This is one of the most cost-effective and stable 433Mhz radio remote control switch, the powerful radio signal transmission can penetrate through walls, floors, doors and so on. It can be controlled in open space within a distance of about 50 metres.

Pair up to 250 Remotes - Simple wire connection makes installation labor-saving. Just connect the ERM12 to the gate opener system. Program the M12 Remote Control (incl.) with ERM12 universal receiver, and then the M12 remote will perfectly makes the gate operate between open-stop-close-stop-open. All TOPENS swing and sliding gate openers can be operated by the M12 remote. ERM12 rolling code external receiver can be programmed with up to 250 pcs TOPENS M12 remote control transmitters.

Long Range Small and the performance is stable and reliable, high sensitivity, signal can pass through walls, floors and doors. Range up to 50m in open space. Note When the remote control distance can t meet the requirements, pls replace the battery; The remote control distance will be affected by the use environment. Do not place the receiver or remote control in a metal case or near a metal object; You can try to straighten the receiver antenna to increase the remote control distance.

4) Repeat for another button.

More flexibility The receiver contains 4 relays, each with 3 terminals (normally open, common, normally closed). These 4 relays are independent, for example you can use two relays to control the garage door motor and the other two to control the lights. Each receiver can store about 20 transmitters.

Mini design (L x W x H) 2.2 x 1.3 x 0.8 in.

Wireless Control The maximum range of the wireless controller can be up to 164 feet 50 metres in the open area, the 433MHz RF wireless remote control switch has stable performance and can penetrate through walls, floors, doors and so on. Control the device you want to control by wireless signal, bring more convenience to your life.

Working temperature -40 - +80

Stable Signal The universal garage door remote adopts wireless radio frequency technology with an operating frequency of 433 MHz, which can achieve ultra-long-distance remote control without "interference". The signal can pass through walls, doors, floors, and is very stable.

433Mhz RF Small and the performance is stable and reliable, high sensitivity, signal can pass through walls, floors and doors. Range up to 50m 164ft in open space.

Flexible Design The receiver has 2 relay channels which do not interfere with each other, and each relay has 3 terminals (normally open, shared, normally closed) for independent control. Each receiver can store up to 15 handheld transmitters.

Control Voltage DC 12V-36V,24V,Low volt Control High Volt Switch Relay Load 10A 1V-240V DC AC), 10A 240V AC , 10A 125V AC, 10A 30V DC, 10A 28V DC, 10A 12V,Wide Voltage load

Great design 433Mhz RF wireless remote control switch.Stable and reliable performance with high reception sensitivity ( 97dBm). Radio frequency signal transmission.Strong signal can pass walls, floors, doors,board and so on.It can be controlled within 30 meters distance with no obstacle. The code of the chip is EV1527 learning code which is the most popular technology that make the remote control system more security.

Remote controls pre-programmed and ready to use. Free batteries fitted.

EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse momentary, hold toggle and latching mode.