Dash Cam Suction Cup & Glue Adhesive Mount for Dash Cam, Come with 10+ Different Joints Compatible with TOGUARD, apeman, Yi, Mibao, SuperEye, Modohe, DuDuBell, Crosstour and Other Dash Cameras

Quick & Easy Installation The Click&Go PRO mount simplifies dash cam setup, with your power cable plugging directly into the mount for a completely wireless experience.

Size 44 x 34mm

CERTIFIED NEXTBASE REPLACEMENT STICKY PADS The official Nextbase Series 2 Dash Cam Replacement Window Mount pack lets you replace the sticky pads and backing plates that attach to our GPS and Non GPS Series 2 Mounts - mounts not included.

Instructions for use Clean the area to be attached and keep it dry When the tape is glued, apply the appropriate pressure evenly, please hold down for 10 to 30 seconds Step After pasting, it is recommended not to use immediately, to maintain the stability of the later paste, the better the effect is after 24 hours of pasting, the longer the sticking time, the stronger the stickiness.(3M Vhb adhesive pad is one-time use item)

Designed for Suction Cup items Volport 90mm large size heat temperature resistant 3M sticky adhesives paper for dashboard windshield suction cup mount, make your sucker stronger. You can also adhere the grey adhesive foam tape to the dashboard pad mounting disk. Applicable to most suction cup dashboard stand and windshield long arm mount of dash cam, Action camera, rear view camera, backup camera, GPS navigator, mobile phone, sink sponge holder, basket. You can also cut it to the size you need. NOTE Can't Be Used On Silicone

Fits most popular car dash cam compatible withTOGUARD, YI Nightscape, OldShark, apeman, Crosstour, Mibao, SuperEye, Modohe DuDuBell Dash Cam. Not compatible Garmin Dash Cam.

Comprehensive Mounting Solution Includes both the heavy duty double-sided tape mounting bracket and the windshield electrostatic film for a secure and hassle-free installation.

Multipurpose Use Beyond dash cams, these sticky pads are versatile.3m vhb pads are excellent for various indoor and outdoor applications like heat insulation, sealing, bundling, and even attaching number plates.

Low-profile design blends seamlessly with the vehicle's interior

GPS MOUNT FOR NEXTBASE SERIES 2 COMPATIBLE MODELS The new, exclusive Click&Go PRO Magnetic GPS Mount installs the power cable directly into the mount so your dash cam is wireless - for Series 2 322GW, 422GW, 522GW and 622GW only. The GPS feature is provided within the mount and has GPS logging so that you can view your journey tracker via Google Maps and record the speed of your driving for claims.

Small Size - This replacement adhesive mount holder is a light mini mount with adhesive size of 37 mm. It will not block sight during driving.

Tips The adhesive mounting disk only works with any 95mm 3.74 inch or smaller than 95mm 3.74inch suction cup holder pedestal accessories.Please do not touch the adhesive with your finger. Select a ensure place to adhere and install, then do not move it again.

Heat Resistant & High Adhesion Volport's 56mm 2.2" 3M Dash Cam Sticky Pads offer 40% stronger adhesion than ordinary adhesive pads. The high-bond attachment reinforces the vacuum cup seal, ensuring the dash cam suction cup mount stays firmly in place even on bumpy roads. The premium gel material withstands temperatures up to 120 C (248 F) and remains intact on the windscreen without melting, even in extreme summer heat

Strong Suction Power. Experiment shows this windshield mount can hang up 9 POUNDS of cola, dashcam usually weights about 0.5 pound, this suction cup mount can hold it tightly even in a bouncy work truck

Single-Use Design Each dash cam sticky pad is innovatively designed for one-time use to maintain maximum adhesive strength. It's recommended to avoid relocating the pads to prevent any reduction in stickiness due to impurities

High-quality materials The product includes a small dashcam mount and a 6x8 cm static sticker. The dash cam mount is made of high-quality plastic, which is sturdy and durable, and the high-quality adhesive backing ensures that it can be firmly fixed even in bumpy work trucks.

What You Will Get 2pcs rectangle 2.83" dashcam adhesive pad and 2 pcs 1.42" square dash cam tape for windshield panel are included, comes with auxiliary stickers to help you easily fix the driving recorder to your car window glass, it's hassle-free application and clean removal without leaving any residue. We provide life-time support for our product, if you have any problem, welcome to contact us via Amazon, we will reply to you in 8 hours

HIGH QUALITY Double-sided 3m VHB tape offers a dependable and long-lasting grip on any flat surface, ensuring your Gopro or Dash Camera remains firmly in position.

COMPACT & DISCREET DESIGN The adhesive Dash Cam Mount measures just 45mm, designed to be lightweight and unobtrusive, so it won t interfere with your view while driving. Its compact design ensures it blends seamlessly with your vehicle's interior.

High Quality Material - Car dash cam mount bracket made of ABS material, black color, the connection interface is made of POM material, the suction cup is PVC.