Pxyelec NGFF M.2 SSD Solid State Drive To 2.5inch SATA 7+15Pin Adapter Card with Enclosure Black for Laptop/ Desktop

Applicable SSD This M.2 SSD Enclosure supports SATA-based M.2 NGFF(B Key&B+M Key) SSD 2242 2260 2280mm solid state drivers, Not supports NVMe PCIe M.2 M Key SSD;Before purchasing, please check your SSD label. If it prints PCIE, NVME, this enclosure will not support.

SUPER SPEED TRANSFER M.2 SSD enclosure is an excellent solution to connect your m.2 SSD (NGFF) to your computer. This gives you an ultra-high data transfer rate of up to 5Gbps when used with USB 3.0. For example, a high-resolution film can be transferred in a matter of seconds.

BOOST SYSTEM PERFORMANCE Increase system performance by adding the speed of an M2 SSD in any 2.5 inc SATA application with the M2 SSD to 2.5in SATA Adapter; Open design maximizes heat dissipation to protect the health of your drive

Please do not use you NVME SSD M Key on this adpter. Not Supported.

Convert an M.2 NGFF (SATA Channel) SSD to a standard 2.5 inch SATA hard disk drive. B&M Key SATA based NGFF SSD to SATA III converter card. Input 1 x NGFF B&M Key SATA based (SATA Chanel) socket; Output 2.5 inch SATA

Support OS booting from the M.2 NVMe SSD. Please reinstall OS and set up BIOS UEFI boot from this M.2 NVMe SSD. (Note Some motherboards are too old to support OS booting. In this case, M.2 NVMe SSDs can be used as storage disks)

Simple Tool-Free Installation Easy to use, no additional tools required, just open the lid, insert the hard drive and secure it. Please refer to the accompanying English instructions for specific steps.

Applicable SSD - This M.2 SSD Enclosure is for NVMe PCIE & SATA M-Key B+M connectors M.2 SSD. Applicable to sizes 2242 2260 2280 solid state drivers. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Note NVMe and SATA SSD are not included.

Adopt large capacity capacitance, high power LDO Control chip, ensure more stable performance, and enjoy faster transmission.

Soket 2 B Key M.2 NGFF SSD (SATA Transfer Mode) to 2.5 Inch SATA Adapter.

INCREASED PRODUCTIVITY Using an M.2 SSD to SATA adapter in place of a platter drive better utilizes your SATA III controller, by reducing any bottlenecks with file transfer speeds up to 6Gbps

Product Size 100 mm x 70 mm x 0.07 mm (L x W x H)

There is no hard disk included at the case.;Only work for E431 E531 X240 Y410P Y510P M.2 NGFF PCI-E 2 LANE SSD

Compatible with M.2 NVME and NGFF (SATA) NGFF NVME compatible hard drive enclosure, M.2 corresponds to two different hard drives. It supports M.2 NVME or NGFF (SATA) in 2230 2242 2260 2280mm sizes. Compatible with B-key, M-key and B+M-key. Meet the needs of different scenarios and save time, effort and money by eliminating the need to deploy two additional hard drives! Note PCI-E AHCI protocol is not supported.

Portable 2-in-1 Cable This ultra-compact NVME SATA case uses 2 -in -1 data cable, which is very suitable for carrying, and arbitrarily connects USB A or USB C device

The speed and other properties are not changed, only the form conversion interface.

Universal Compatibility RSHTECH M.2 SSD enclosures support M.2 PCIe NVMe and SATA SSDs with M-Key or B+M interfaces. Supports M.2 solid state drives form factor 2242 2260 2280. Easily connect and use different types of M.2 SSDs for maximum flexibility

SFF-8639 NVME U.2 to Combo NGFF M.2 M-key SATA PCIe SSD Adapter for Mainboard Replace SSD 750 p3600 p3700

HIGH PERFORMANCE Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1

Specification This converter card support SATA III specification and the data transfer speed up to 6.0Gb s. Compliant with PCI Express M.2 specification 1.0.