DollaTek Charge Control Module 12-24V Battery Protection Board for Lead Acid Battery and Lithium Battery

Control accuracy 0.1V

Input voltage DC 10-30V; Control current max 20A; Control precision 0.1V; Output type direct output; Voltage tolerance 0.1V; Application fields 12-24V storage battery.

LED Indicator This battery charger module is designed with a LED indicator to show if load is cut off or turned on. Simplify installation steps, no modification, cutting, or drilling required. Easy to install and use

Convenient to Use It will automatically identify voltage between 5V and 48V DC

Yencoly

easy to operate --In over-charge and float mode, the regulation voltage is internally set.The constant current is programmable with a single sense resistor.

The DD30CRTA is a PWM switch-mode battery charger controller for 12V lead-acid battery in a small package using few external components.

Reliable use Small size, high current, accurate shutdown voltage stability, careful, functional and protection and performance

Equipped with a special voltage control IC and a special car relay.

Efficient Charging The Panel Controller features advanced technology to efficiently charge lead-acid batteries. With trickle, constant current, over, and floating modes, this controller s optimal charging performance.

The DD30CRTA is a PWM switch-mode battery charger controller for 12V lead-acid battery in a small package using few external components.It is specially designed for charging 12V lead-acid battery with trickle charge, constant current charge, over-charge and float charge mode.

Multi-input for Battery Charging Renogy DC-DC On-Board Battery Charger is designed to charge service batteries from a starting battery linked to an alternator, or by utilizing solar panels connected directly to the unit, offering multiple charging options and ensuring your battery stay fully charged. Compatible with multiple deep cycle battery types AGM, GEL, Flooded, and Lithium

FUNCTION - The charging control module is used for emergency battery switching; when the main power terminal has power, it is connected to the main power supply as a power source; otherwise, it will automatically switch to the battery.

AUTOMATIC CHARGING The controller is an automatic and discharge control device installed in most solar power generation systems in order to avoid the battery damaged and prevent overcharging

Protection Overcharge Protection; Overdischarge Protection; Short Circuit Protection; Overcurrent Protection.

The IP5328P bidirectional fast charging module is a module that supports bidirectional fast charging function, supports multiple fast charging type, bidirectional 18W fast charging, and the battery charging module has a constant current and value-voltage lithium battery charging management system that supports synchronous switching structure. Step-up charger board can automatically match different charging voltage specifications,which support a total of 4 charging interfaces.

Charging Voltage 12.6 V 13 V; Charging Voltage Range 4.25 0.05V to 4.35V; Discharge Voltage Range 2.3 0.05V to 3.0V

AUTOMATIC CHARGING The controller is an automatic and discharge control device installed in most solar power generation systems in order to avoid the battery damaged and prevent overcharging

Module combines a TP4056 battery charger with a boost circuit. Add a battery and turn low powered DC devices into USB rechargeable devices.

3S 20A BMS Maximum Output Current 20A;Quiescent Current