Extra Strong Glue for Plastic 8ml + 8g for Manufacturing and Repair of PP PE PTFE Teflon and Silicone Parts

Show on Amazon

Offer

i

Price trend

Product description

  • Viscosity 40cP. Density 1,1g cm . Fills irregularities from 0,1 to 0,15mm. Initial curing time 5 to 60 seconds. Final curing time 24 hours. Resistant to temperatures from -55 C to +80 C.
  • Permits gluing surfaces of PP, PE, PTFE, Silicone themselves and to different materials such as metal, stone, glass etc. Can also be used to glue easy-to-bond surfaces (PVC).
  • How to use The surfaces to be bonded should be cleaned and free of dirt. Apply a thin even coat of primer to hard-to-bond surfaces Apply 2 to 3 coats of primer to porous surfaces Do not use the primer on easy to glue surfaces. Leave on for 5 to 8 minutes. Apply a thin layer of glue on one of the surfaces to be glued. Immediately join the elements to be glued, press and hold for a few seconds.
  • 1 bottle of primer of 8ml with applicator brush + 1 bottle of glue of 8g with applicator brush.

You might also be interested in these extra strong plastic glues.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.