FLY RC 2S 7.4V LiPo Battery Balance Charger Cable Lead Wire Connector(10pcs 2s)

LED Indicator When you connect the charger to the 7.4V lithium battery, Coll1 Coll2 starts to light up red, and the 7.4V lithium battery is being charged. When you connect the 11.1V lithium battery, Coll1 Coll2 Coll3 starts to light red, and the 11.1V lithium battery is charging. When the lithium battery is fully charged, the LED indicator will be in a steady green state.

Features USB Connectors to use with any USB Outlet charger adapter. Has a IC Protectionunit, for protection against over charge and short-circuit. Green and Red LED Indicators show if it is still charging or fully charged. Output has a XH-3P plug, 3 Pin Port Connector.Put Together with Care, to charge Your LiPo Batteries fast and safe.

More Suitable Batteries Our balance airsoft charger is not only suitable for 2S 3S Lipo LiFe batteries (7.4V,11.1V), but also for (1S-8S) NIMH batteries (1.2-9.6V).Lipo battery charger is suitable for charging Rc car drone boat toy airsoft batteries, etc., so that you don't have to worry about the recharge of these professional equipment, and you can become a professional player at any time.Note Two batteries cannot be charged at the same time, only one can be charged at a time

Indicator Light The lipo battery USB charger cable has an indicator, When charging, the green light turns off and the red light is on. When the battery is fully charged, the green light stays on and the red light turns off.

Wide Application This LiPo battery USB charger cable is compatible with 7.4V 2S LiPo batteries or battery less than 1500mAH, which is widely used for devices such as RC cars, trucks, boats, drones, aeroplanes, quadcopters, helicopters, gliders and other devices with SM-3P plugs. (Please Check the Length and Plug Type Before Order).

Ultra Safe Our high technology enables intelligent IC protection. Built-in overload, over-voltage, overcharge IC protection circuit. Please make sure that the voltage(7.4V) match before use.

Indicator Light The lipo battery USB charger cable has an indicator, When charging, the green light is flashing and the red light is on. When the battery is fully charged, the green light stays on and the red light turns off. If the red light is always on, it means that the charger is not charging your battery.

Suitable for a variety of batteries such as RC battery rc battery charger Supports repid charging and discharging for the new generation of A123 (Li-Fe) system battery, for LiPo, Li-Ion, Li-Fe, LiHV Battery (1 -6S), NiMH, NiCd (1-15S), great battery type compatibility.

This LiPo battery USB charger is specifically designed for 7.4V LiPo batteries and comes equipped with an SM-3 PIN PLUG. Before use, please ensure that the voltage (7.4V) is compatible. The input is DC 5V 2A, output is 7.4V 1000mAh, connector is USB to SM-3 PIN Plug

This USB battery connector is used to charge 7.4V lithium batteries and is compatible with RC car drones and Quadcopters SplatRball water gun etc...

Easy To Use Press the "Batt.Type" button to the user settings or select battery type or exit the program, press the "Start" button twice to the parameters setting, press the "Dec." or "Inc." button to switchover, press and hold the "Start" button to charge battery

Efficient Charging LiPo battery USB charging cable plug. Specially designed for charging 7.4V LiPo batteries, input DC 5V, output current 800mA. 2-3 hours to full charge (depending on battery capacity).

7.4V Charger with 3 Pin connector, fit most 7.4V Battery for RC Quadcopter ,RC Boat, RC ,and RC Truck.

Efficient Charging LiPo battery USB charging cable with SM-3P plug. Specially designed for charging 7.4V LiPo batteries, input DC 5V, output current 800mA. 2-3 hours to full charge (depending on battery capacity).

Package List 1x C150 balance charger, 1x AC power cord, 1x DC cable, 1x JST 2S-6S charging borad, 1x battery safe bag, 1x octopus multi-charging harness with 8 common connectors(Tamiya, tamiya mini, XT60, JST, Deans, EC3,TRX, FUTABA).

This LiPo battery USB charger is specifically designed for 7.4V LiPo batteries and comes equipped with an SM-4 PIN PLUG. Before use, please ensure that the voltage (7.4V) is compatible. The input is DC 5V 2A, output is 7.4V 1000mAh, connector is USB to SM-4 PIN Plug

High-quality & Safety The lipo charger is made of high-quality chips and materials to provide you high-quality products and function performance, and the charger also has short-circuit protection, overcharge protection, overcurrent protection and overheat protection for safety design.it is very safe to buy.

This LiPo battery USB charger is specifically designed for 7.4V LiPo batteries and comes equipped with an XH-3 PIN PLUG. Before use, please ensure that the voltage (7.4V) is compatible. The input is DC 5V 0.5-2A, output is 7.4V 1000mAh, connector is USB to XH-3 PIN Plug

Automatically adapt to USB input power, quickly and stably recharge the battery.

MEIRIYFA 7.4V 1A Lipo battery USB charger cable has an indicator light, when the light shows red, it means no-load state; when the red light is always on and the green light is flashing, it means charging state; when the green light is always on, it means full state.