Hantek CC65 AC/DC Current Clamp Meter for Oscilloscope 20KHz Bandwidth 1mV/10mA 65A with BNC Connector

Clamp Measuring --- Clamp Jaw Measures AC Current Up to 28mm Without Interrupting The Circuit, Which Makes Clamp Tester Much Safer To Use On Mains Cables And High Current Loads In Vehicles

AC DC CLAMP METER This clamp meter can accurately measure AC DC current, AC DC voltage, temperature (thermocouple included), NCV, capacitance, frequency, resistance, continuity and diode. Good help for troubleshooting the household solar system, automotive and industrial electrical issues, perfect for electricians, DIY, professionals, etc.

45mm Big Open Jaw Meter Designed with 45mm 1.77 inches large open jaw, easy to clamp on thick wire to measure high ampere AC DC current up to 600 amps. No need to break the electrical wires.

Ergonomic and lightweight Auto range, 2 3 times s sampling rate LCD backlight, data hold Auto power off, low battery indication

True-RMS This clamp multimeter can accurately measure AC DC Current, AC DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs, factories and household.

AC DC 600A Clamp-on Probe Capable of measuring AC DC up to 600 amps, This clamp adapter is built for higher current measurement.

4000 Counts, AC DC Voltage & Current 600A Offering high-current and high-voltage measurements, this clamp meter is perfect for a wide range of applications, from professional electrical work to DIY projects. With its ability to measure both AC and DC currents up to 600A and voltages within its specified range, it provides versatility and reliability

1. Auto-Ranging Clamp Meter 2000 counts with auto decimal selection. NCV detects in-wall AC voltage for safe, user-friendly troubleshooting

Perfect clamp meter with high reliability and high precision

Auto Range Multimeter This digital multi tester can check AC DC voltage from 600mV 1000V, AC DC Current 0.1A 1000A, Resistance 600 ohm to 60M , Capacitance up to 99.99mF, liquid temperature 4 F 1832 F, Frequency up to 9.999 MHz, Duty Cycle 0.1% 99.99%.

Power circuit measurement and malfunction analysis

Non contact Voltage Testing Stable, safe and reliable 3 1 2 digit LCD digital clamp meter, capable of AC DC voltage, AC current, resistance, diode measurement, with on-off test and with backlight function.

Notice if the Clips are short,you can pull out,it is easy.

Multi-Function PREXISO new generation of high-performance, dual-impedance multifuncation digital clamp meter can use for accurate measurement of AC DC voltage, AC current(only AC current Not DC current), resistance, capacitance, diode and continuity test. You can use as multimeter, voltmeter, ohmmeter or continuity tester. Different functions meet your different measurement needs.

Open Jaw Design The clamp multimeter tester measures dc and ac current through the fork-type jaw without interrupting the circuit. Also its slim and compact size makes it easy to measure in tight or narrow spaces. Open pen shape design fits into tight spaces where standard grippers can't close.

Attention Before testing DC current, zero out the readings several times and hold the meter in the same orientation when taking readings. Because clamp meter is use the Hall effect sensor to detect dc current.

Accuracy 3.6F (1.8C)

This Mini True RMS 6000 Counts clamp meter measures DC and AC current by jaw from 1mA to 100A, DC and AC voltage to 600V

AC Current Measurement&Safety First You CAN NOT use the AC clamp on any meter to go around a whole electrical cord but you have to go around 1 of the 3 wires inside.Otherwise,the ac amp meter will show a zero amp reading.This clamp current amp meter with safety standard CAT 1000V or CAT 600V, and overload protection on all ranges.3-Year after-sale service provided.

Multi Function Clamp Meter Measure the DC voltage of 400mV-600V; AC voltage 4V 600V; DC current 400uA 4000uA and AC current 400uA-400A; Resistance 400 - 40M ;Non contact voltage(NCV) detection, diode, continuity buzzer test are also provided.