BQLZR DC LED Touch Dimmer Switch Sensor Lamp Accesories 6-12V

STBTECH

Smart Touch Switch Just Short Press To Slowly Turn The Led Lights On And Off Long Press To Dim And Control The Light Continuously It Has A Memory Function, When You Turn On The Light Again, The Light Brightness Is The Same As The Last Time Automatically (Automatically Reset After A Power Failure).

The touch dimmer switch is an electrical switch, made of ABS Plastic shell. For home lights, such as table lamps, ceiling lights.

Touch Control The dimmer switch is switched in touch mode, no mechanical wear and tear, and the static power consumption is less than 1W. If you use it, you can achieve non-directional color control over a large distance by simply touching the corresponding button with your finger.

Note If the switch doesn't work at first time, pls cut off power and operate again. The chip inside will start a protection procedure when a long time stop working

Smart touch control short touch to turn on, touch again to turn off, long touch for stepless dimming. It has a memory function, when you turn on the light again, the light brightness is the same as the last time automatically. (However, it will automatically reset after a power failure).

WIRELESS CONTROL The intelligent controller uses stable wireless and capacitive touch methods, and can achieve omnidirectional remote control by simply touching the corresponding buttons with your fingers.

Touch Sensor Switch With Built-in "Touch" System and blue light in the sensor, easy to find the switch in the dark.

It is suitable for the LED .No need to find where the switch is in darkness, touch the light body, you can easily switch on or off and adjust the brightness.

Touch the finger pad for less than 5 seconds for ON OFF function, hold for more than 5 seconds for dimming function.

Adjustable Brightness Equipped with brightness controls, this wall switch controller allows you to customize the intensity of your LED light strips as per your preference.

LED built-in touch dimmer 12 V for doors, tables, walls, mirrors and much more.

DC 12V 24V 3A With Memory and Blue Led Light Indicator When Accessed

DC plug male and female waterproof connector can be used after connecting to the socket of the light strip. If necessary, the interface can be cut off. For DIY connections, the output should be divided into other parts, and the input can be used as a +-pole line.

the medium materials The touch sensor can sense the medium materials wood plate, rock plate, stone, paper, acrylic, plastic, glass, and other non-metallic conductor materials.

Package Contents 1x Switch

Clear Indication The switch has red color for turning off the light and blue color for turning on the light, providing clear indications.

Note If the switch doesn't work at first time, pls cut off power and operate again. The chip inside will start a protection procedure when a long time stop working

DC 12V-24V dimmer This dimmer switch can easily control the brightness of the monochromatic LED strip. Suitable for indoor and outdoor lighting. It can also control a variety of LED light sources. For example, point light sources, flexible light strips, wall washer lights, panel lights, etc. Notice static power consumption less than 1W, high sensitivity Touch Panel Dimmer Wall Switch Controller.

Touch sensing technology, easy and simple to operate.