Hantek 6022BE PC USB 2CH Digital Oscilloscope 20MHZ Bandwidth 48 m SA/1 m WOSONTEL BNC Probe

Scope Mode 1. The waveform refresh rate is up to 10000wfms s. 2. Dual channel input, bandwidth up to 50MHZ, real-time sampling rate 250MSa s, recording length up to 8k dots. 3. Cursor measurement function. 4.7 kinds of automatic measurement functions. 5. XY function. 6. One key automatic setting function, convenient for detecting and debugging.

Handheld Oscilloscope The oscilloscope has 2 channel interfaces, supports dual channels, a sampling rate of 50M, a storage depth of 32KB, supports saving and exporting waveform screenshots, switching between three trigger modes (automatic, normal, single), and a time base range of 50ns-10s.

Digital Oscilloscope Mode Dual-channel 2x10MHz bandwidth, 50MSa s real-time sampling rate. Handheld Oscilloscope has complete trigger functions (single normal auto), efficient one-click AUTO and 20mv div-10v div vertical sensitivity, with a max measurement voltage of 400V. Supports waveform image storage and export to facilitate secondary waveform analysis. Storage depth 32kb.

Math transportation and FFT function, XY mode supports dual window display.

Faster Sampling Speed The DSO152 mini oscilloscope has a real-time sampling rate of 2.5MS s and a bandwidth of 200KHz. The 10x probe can measure up to 800VPP, which is equivalent to 280V AC. Voltages up to 400V can be measured.

1 110 MHz bandwidth, 500 MS s *2 real-time sampling rate, dual channels, 2 ns Div 1000s Div time base range; 20 mV div 5 V div vertical scale, storage depth (each acquisition The recording length of the waveform) is not less than 10K sampling points; it can store not less than 16 groups of waveforms, and has U disk storage function, USB device and host interface;

Parameters 2CH (each controlled by rotary knob), 100MHz bandwidth, 1GSa s sampling rate, 8M memory depth, 8bit vertical resolution. The Hantek DSO2C10 models do not include a 1CH 25MHz waveform generator

Parameters 2+1CH (with 1CH 25MHz waveform generator), 150MHz bandwidth, 1GSa s sampling rate, 8M memory depth, 8bit vertical resolution, 4K arb waveform length

Data Saving & Exporting Built in 3000mah rechargeable lithium battery, It can work continuously for 6 hours after being fully charged. Economical oscilloscope supports export + saving and viewing of waveform screenshots to facilitate you to conduct data analysis again. Allowing you towork outdoors without being limited by the site.

COMPATIBILITY Widely applicable in the academic experiment, electronics repair, electronic engineering etc.

Software Support Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, Vista

High Performance Oscilloscope This tablet oscilloscope is featured with 2 channels of 100MHZ bandwidth and 1GSa s sampling rate for both periodic analog signals and aperiodic digital signals. Built-in a high-voltage protection module, the anti-burn oscilloscope kit can continuously withstand 400V.

Use your PicoScope 2000 Series as an advanced oscilloscope, spectrum analyzer, function generator, arbitrary waveform generator and decode 40 serial protocols as standard out of the box.

Excellent energy management Extremely low full power consumption of less than 3 W. Powered by two 2200 mAh lithium batteries, totalling 4400 mAh, a single battery can provide normal power. Easy battery replacement.

Hand-held dual channel oscilloscope, and recorder

Be suitable for notebook computer, product line maintenance, be used easily on business.

Powerful software Friendly UI FFT or X-Y, and waveform 2 views displayed on the same screen, practical features, make testing easier.

Professional Storage Oscilloscope - Super-economical digital storage oscilloscope,cost-effectiveness, SCPI and LabVIEW supported,100MHz bandwidth 2CH scope,1GS s sample rate,8-bit high resolution.Low background noise,vertical sensitivity of 5mV div - 5V div (at input)

Faster Sampling Speed The mini oscilloscope has a real-time sampling rate of 2.5MS s and a 200KHz bandwidth. The 10x probe can measure up to 800VPP, which is equivalent to 280V AC. Voltages up to 400V can be measured.It can be used freely for both periodic analog signals and aperiodic digital signals.

Remote Control and U Disk Storage Hantek DSO5102P oscilloscope can store more than 1000 waveforms information, and can upgrade the system through the USB port, support plug-and-play USB storage devices and communicate with the computer and remote control through USB.