ElekTek Lamp Holder Unswitched B22 BC Bayonet Cap with Shade Ring 10mm/M10 x1 Threaded Bottom Entry Made in UK - Chrome

Show on Amazon

Offer

i

Product description

  • Standard UNSWITCHED B22 (22mm) bayonet cap Lamp Holder with shade ring - suitable for bulbs up to 200W (for SWITCHED B22 version, ElekTek Safety Switch available in separate listing which cuts power to the plunger contacts when a bulb in not in place)
  • Hand assembled - easy to separate for fitting simply remove the thin upper shade ring by unscrewing anti-clocwise; hold base with the Earth terminal pinched between thumb and index finger and unscrew thicker lower ring by unscrewing anti-clockwise. When re-assembling ENSURE ceramic insert is aligned correctly in base & body alignment slots are aligned with ceramic insert
  • Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use (beware of cheaper, pressed type bases that cannot carry a locking screw) - loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring
  • WARNING All metal light fittings must be earthed

You might also be interested in these 10mm sockets ring.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.