Clamp Current Probe, AC DC Clamp Current Probe Tester 1mA - 400A Test Range 200KHz Meter for Oscilloscope, Meters
Show on Amazon
Show on Amazon
Offer
£ 192.95
free shipping | 1-2 Days
go to shop
Product description
- Auto zero at power on, relative zero correction
- Various current test range, 4A, 40A, 200A, 200-400A test range are available
You might also be interested in these oscilloscopes current clamp.
Hantek CC650 AC/DC Current Clamp 400Hz Bandwidth, 1mV/10mA, 650A Auto Oscilloscopes and DMMs, BNC Plug
Effective Measurement Range 20mA to 650A DC.
free shipping
Check price
Hantek CC65 CC-650 AC/DC Current Clamp Meter for Oscilloscope 20KHz Bandwidth 1mV/10mA 65A with BNC/Banana Type Connector
Power circuit measurement and malfunction analysis
free shipping
Check price
Pico Technology 60 A AC/DC current clamp for PicoScope automotive oscilloscopes TA018
These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup
free shipping
Check price
Hantek CC-800 AC/DC Current Clamp 5KH Oscilloscope Multimeter Bandwidth 1mV/10mV/A 500A/800A with BNC Connectorrary Waveform Generator
The diameter of the measurable conductor up to 30 mm.
free shipping
Check price
OWON CP024 AC/DC Current Clamp Probe for Oscilloscope, Current Tester Clamp Meter 200KHz Bandwidth 1mV/10mA 400A Relative Zero Correction with BNC Type Connector
Wide Test Range The OWON CP024 current probe is ideal for use with automotive oscilloscopes for measuring currents between 1mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy
free shipping
Check price
Oscilloscope Test Probe Multimeter AC/DC Current Clamp Up to 20 kHz 20mA to 65A DC CE
Effective Measurement Range 20mA to 65A DC
Check price
HANMATEK CO601 Clamp Oscilloscope, 5MSa/s Sampling Rate, 1MHz Bandwidth, 600A AC/DC Current Measurement, 1000V Voltage Detection, True RMS, Auto/Manual Range
2-in-1 Oscilloscope & Multimeter Switch between digital multimeter and oscilloscope mode to perform voltage, current, resistance, and capacitance measurements effortlessly
free shipping
Check price
BSIDE Dual Channel Oscilloscope Multimeter 50MHz Bandwidth Handheld oscilloscope 3.98'' TFT Digital Oscilloscope Multimeter Signal Generator Flexible Current Clamp 4 in 1 Tester
4-in-1 Handheld Oscilloscope this dual-channel 25MHz digital oscilloscope is a full-featured and highly practical oscilloscope, multimeter, flexible current clamp, and signal generator in one. The oscilloscope multimeter has one-key switching mode, automatic waveform acquisition, time base calibration, data storage, data export, data transfer port, 7 waveform outputs, afterglow time, memory and other functions, which are easy to operate and improve work efficiency.
free shipping
Check price
Pico Technology PicoBNC+ 60A AC/DC current clamp for PicoScope automotive oscilloscopes TA473
The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.
free shipping
Check price
Pico Technology PicoBNC+ 2000 A AC/DC current clamp for PicoScope Automotive Oscilloscopes
The wide range of this clamp allows currents from under 1 A right up to 2000 A to be measured. It can be used with a PicoScope for many applications including Battery testing with PicoDiagnostics software, Relative compression testing, Starter motor testing, Alternator output testing and Hybrid and EV electric motor current.
free shipping
Check price
Hantek oscilloscope Probe AC/DC Current Clamp probe Hantek CC-65 CC-650 CC-800 20KHz/400Hz Bandwidth 1mV/10mA 65A/650A/800A with BNC plug(CC-65)
Effective Measurement Range 20mA to 65A DC
free shipping
Check price
Universal AC/DC Current Probe CP2100A 10A/100A Current Measuring Tool Digital Clamp Meter Current Tester with BNC Connector for Oscilloscopes or Mains Analysis, Bandwidth DC 800KHz
Standard BNC Interface This Universal AC DC Current Probe adopts standard BNC interface, applicable to oscilloscope with all BNC interfaces, and adapter can also be used for multimeter.
free shipping
Check price
PINTECH AC/DC Current Clamp Probe for Oscilloscope 300kHz Bandwidth, 0.4A-10A, 10A-200A Test Range, Current Probe with BNC Connector, PT-2720
Test Range PINTECH PT-2720 current clamp measure currents between 0.4A and 200A. RMS value can be measured with AC DC signals.
free shipping
Check price
Test - Test Leads & Probes - AC/DC CURRENT CLAMP OSCILLOSCOPE - TA189 CURRENT PROBE
Price For EachOrder Unit Each Meter Side Connector BNC Plug Probe Side Connector Current Clamp Current Range Min 2mA Current Range Max 30A For Use With PicoScope Oscilloscopes Product Range - SVHC No SVHC (17-Dec-2015)
free shipping
Check price
OWON CMS061 AC/DC Clamp Meter 600A, Recorder Function, Oscilloscope Function 3 in 1, 20000 Count True RMS Auto-ranging, Alarm Function, NCV Function, Bluetooth Clamp Meter for Electric Vehicle
Remote Control and Safety Alerts OWON CMS061 supports Bluetooth communication with both Android and iOS devices, enabling remote control and meeting specific testing requirements. It includes a customizable alarm function with upper and lower threshold settings to alert users to any safety concerns
free shipping
Check price
PINTECH AC Current Clamp Probe for Oscilloscope 100kHz Bandwidth, 10A/200A/2000A, High Precision Multimeter Current Clamp Meter with BNC Connector, PT-720
Test Range PINTECH PT-720 current probe meter measure current up to 2000A. Maximum working voltage up to 600V rms.
free shipping
Check price
OWON AC/DC Clamp Meter, Recorder Function, Oscilloscope Function 3 in 1, 20000 Count True RMS Auto-ranging Clamp Meter, Bluetooth Clamp Meter and Scope, Oscilloscope Current and Voltage Waveforms
All-in-One Multifunctional Tool OWON CMS101 integrates three essential tools into one an AC DC clamp meter, oscilloscope, and recorder. With a 20,000 count true RMS auto-ranging capability, it delivers precise and reliable measurements for a wide range of applications
free shipping
Check price
Pico Technology PicoScope TA019 600 A AC/DC current clamp for automotive diagnostics, Black
The TA019 current clamp is ideal for use with a PicoScope automotive oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.
free shipping
Check price
A622 High Performance Current Probe Clamp Oscilloscope Probe for 100KHz 100A
Electrical Testing
free shipping
Check price
PINTECH AC/DC Current Clamp Probe for Oscilloscope 50kHz Bandwidth, 4000A, Zero Flux Current Probe with BNC Connector, PT-702
Great Stability The probe reduced insertion resistance, reducing the loading effect on the object to be measured, which can improve long-term stability of the current probe.
free shipping
Check price