RIIEYOCA Automotive OBD Power Cable for Dash Cam, 90 Degree Right Angle USB-C to OBD-II Hardwire Adapter with Switch Button Connector Plug and Play 24 Hours Surveillance/Acc Mode (11.5FT/3.5M)

Show on Amazon

Model: RIIEYOCA-OBD-USB-C-90

RIIEYOCA Automotive OBD Power Cable for Dash Cam, 90 Degree Right Angle USB-C to OBD-II Hardwire Adapter with Switch Button Connector Plug and Play 24 Hours Surveillance/Acc Mode (11.5FT/3.5M)
RIIEYOCA-OBD-USB-C-90

Offer

Product description

  • Easy to install The cable simplifies the installation of the tachograph and can plug and play. And it can be hidden for beautiful wiring. You can use the switch to choose two different operating modes for the tachograph
  • ACC Mode "O" The car ignites and starts the power supply, and the OBD line automatically stops the power supply after the car is turned off and delayed for 20 minutes. (Input 12.8V-36V; output 5V 3A)
  • Monitor Mode " - " 24H continue parking monitoring, power supply after the car is turned off until the car battery is lower than 11.6 V, the OBD line will automatically stop the power supply after a delay of 5 minutes. (Input 11.6V-36V; Output 5V 3A)
  • Low voltage protection The OBD line has a built-in MCU intelligent control chip, which can detect the car battery power in real time. When the car power drops to the low voltage protection value of the OBD line, the OBD line automatically enters the low voltage protection and turns off the output
  • Compatibility Alert This OBD cable is ONLY for petrol diesel vehicles (ICE). Not compatible with electric hybrid cars (BEV PHEV). Check your vehicle type before purchase!

You might also be interested in these nextbase series 2 obd power cables.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.