valonic trailer plug - 7-pin, black - incl. wiring template - 7 pin trailer connector for caravan

Show on Amazon

Offer

Product description

  • INSTRUCTION-2 8. make sure that the "nose" of the contact receptacle is on the marking of the template 9. insert all cables according to the template labelling and tighten. 10. remove the component and insert it with contact pins into the housing. Remove the template and insert the component with contact pins into the housing. 11. Tighten the screws of the strain relief. 12. Assemble the enclosure. 13. Slide the rubber cap onto the end.
  • SPECIFICATIONS The 7-pin trailer hitch connector measures 10 x 5.8 x 4 cm and weighs 63 grams. Suitable for 12V or 24V wiring.
  • INSTRUCTION-1 Remove the rubber cap from the thin end of the plug. 2. Unscrew the two screws at the thicker end. 3. Open the housing. 4. remove the contact. Attach (optional) wire end ferrules (not included) to the wiring harness. 6. 6. pull the wiring harness through in this order Rubber cover, strain relief 7 Insert the contact holder with contact pins into the template so that the screws and the template imprint are visible.

You might also be interested in these 7 pin trailer plug with spades connectors.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.